Abstract:Accurate assessment of fracture behavior and life prediction of cracked materials based on the mixed mode fracture criteria is of utmost importance in fracture mechanics. In this study, the modified fracture criteria incorporating T-stress for mixed mode I-II cracks were comprehensively reviewed. Additionally, a comparative analysis was conducted between the experimental results obtained from five different cracked configurations and the theoretical predictions according to these modified criteria. Moreover, a brief discussion was held regarding the effect of T-stress on both crack initiation angle and fracture toughness, accompanied by providing some suggestions. The results revealed that the predictive accuracy of modified criteria exhibited noticeable variations across different cracked configurations due to the significant disparities in both the sign and magnitude of T-stress around the crack tip. However, it was observed that the predicted curves based on the modified fracture criteria for the semi-circular bend and edge-crack triangular specimens had remarkable similarities owing to their similar biaxial stress ratio B. When the mode II loading dominated, the generalized maximum tangential stress, generalized minimum strain energy density and generalized averaged strain energy density criteria were suitable for the semi-circular bend, edge-crack triangular, central crack rectangular and short bend beam specimens with positive T-stresses, whereas the maximum tangential strain, generalized maximum tangential stress and generalized maximum tangential strain energy density criteria could provide better theoretical predictions for central cracked Brazilian disk specimens having a negative T-stress.

Minimization of the Stress State and Fracture Parameters of a Composite in Bending

The Stress Intensity Factors of Multiple Inclined Cracks in a Composite Laminate Subjected to In-Plane Loading

Calculation technique for simulation of wave and fracture dynamics in a reinforced sheet

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Design and optimization of composite sub-stiffened panels

The Stress Intensity Factor and Propagation of an Inclined Crack in the Central Layer of a Composite Laminate under Tension

Prediction of overall tension behavior of short fiber-reinforced composites

Deformation Mechanics of Fiber-Reinforced Plastic Specimens with a [±45] Lay-Up in Tensile and Compression Tests 2. Investigation of Flat Internal Buckling Modes

The effect of imperfect bonding on stress distribution in fibrous composites

Shear Buckling Mode and Failure of Flat Fiber- Reinforced Specimens in the Axial Compression 2. Numerical Method, Experimental and Numerical Investigations of the Specimens with a [0]s Layup

Calculation of Stress-Strain State of Fiber Composite Adhesive

Application of modified fracture criteria incorporating T-stress for various cracked specimens under mixed mode I-II loading

Reducing stress concentrations in static and fatigue tensile tests on unidirectional composite materials: A review

In-Plane fracture of laminated fiber reinforced composites with varying fracture resistance: experimental observations and numerical crack propagation simulations

Influence of Dynamic Loads on the Fracture of Brittle Layers of a Multilayer Composite

Two objective and independent fracture parameters for interface cracks and a paradox

Caustic analysis of stress singularities in orthotropic composite materials with mode-I crack

The mechanics of matrix cracking in brittle-matrix fiber composites

Multiple crack problem in nonhomogeneous composite materials subjected to dynamic anti-plane shearing

Numerical Study of the Influence of Residual Thermal Stresses on the Fracture of Metal Matrix Composites