Abstract:The metallic interconnects are essential components of energy devices such as fuel cells and electrolysis cells, batteries, as well as electronics and optoelectronic devices. In recent years, 3D printing processes have offered complementary routes to the conventional photolithography- and vacuum-based processes for interconnect fabrication. Among these methods, the confined electrodeposition (CED) process has enabled a great control over the microstructure of the printed metal, direct printing of high electrical conductivity (close to the bulk values) metals on flexible substrates without a need to sintering, printing alloys with controlled composition, printing functional metals for various applications including magnetic applications, and for in situ scanning electron microscope (SEM) nanomechanical experiments. However, the metal deposition rate (or the overall printing speed) of this process is reasonably slow because of the chemical nature of the process. Here, we propose using the CED process to print a single layer of a metallic trace as the seed layer for the subsequent selected-area electroless plating. By controlling the activation sites through printing by the CED process, we control, where the metal grows by electroless plating, and demonstrate the fabrication of complex thin-film patterns. Our results show that this combined process improves the processing time by more than 2 orders of magnitude compared to the layer-by-layer printing process by CED. Additionally, we obtained Cu and Ni films with an electrical resistivity as low as ∼1.3 and ∼2 times of the bulk Cu and Ni, respectively, without any thermal annealing. Furthermore, our quantitative experiments show that the obtained films exhibit mechanical properties close to the bulk metals with an excellent adhesion to the substrate. We demonstrate potential applications for radio frequency identification (RFID) tags, for complex printed circuit board patterns, and resistive sensors in a Petri dish for potential biological applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01890?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01890</a>.SEM images of the single-layer printed Cu and Ni lines with a nozzle diameter of ∼250 μm for different nozzle speeds; The optical images of single-layer Cu and Ni lines printed with different nozzle speeds, and the width and thickness of the printed Cu and Ni lines vs the nozzle speed; The FIB-sectioned cross-sectional images of Cu and Ni films; and The schematic of an unpinned (top) and pinned (bottom) indentation-induced buckle (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01890/suppl_file/am1c01890_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Copper electroplating of 3D printed composite electrodes

Development of Novel 3d Printable Graphene-based Composite Towards Fabrication of Thin Film Electrode Material

Direct electroless plating of conductive thermoplastics for selective metallization of 3D printed parts

Localized Electrochemical Deposition Using Copper Pyrophosphate-Based Electrolyte

Sustainable direct metallization of 3D-printed metal-infused polymer parts: a novel green approach to direct copper electroless plating

Copper and Graphene Composite Material Prepared by Electrodeposition and Its Potential Application for 3D Integration

Combining 3D printing of copper current collectors and electrophoretic deposition of electrode materials for structural lithium-ion batteries

Analysis of the influence of local electrodeposition conditions on the accuracy of electrochemical 3D-printing

Exploring the coating of 3D-printed insulating substrates with conductive composites: a simple, cheap and versatile strategy to prepare customized high-performance electrochemical sensors

Evaluating diverse electrode surface patterns of 3D printed carbon thermoplastic electrochemical sensors

A novel method for improving the electrochemical properties by modifying conductive polymer on 3D printed nanocarbon electrode

Fabrication of Conductive Copper Patterns Using Photocatalyst-activated Electroless Deposition

Interconnect Fabrication by Electroless Plating on 3D-Printed Electroplated Patterns

Tailoring diamondised nanocarbon-loaded poly(lactic acid) composites for highly electroactive surfaces: extrusion and characterisation of filaments for improved 3D-printed surfaces

Electrochemical 3D printing of Ni–Mn and Ni–Co alloy with FluidFM

Selective Cu electroplating enabled by surface patterning and enhanced conductivity of carbon fiber reinforced polymers upon air plasma etching

High-speed electrolyte jet 3D printing of ultrasmooth and robust Cu microelectrodes

Bi-metallic electrochemical deposition on 3D pyrolytic carbon architectures for potential application in hydrogen evolution reaction

Print-and-plate architected electrodes for electrochemical transformations under flow

Maillard Type Reaction for Electroless Copper Plating onto Ceramic Nanoparticles

3D-Printed Lithium-Ion Battery Electrodes: A Brief Review of Three Key Fabrication Techniques