Experimental study of a dual-fuel spark-assisted compression ignition engine with polyoxymethylene dimethyl ether and methanol as fuels
Tiankui Zhu,Zhan Gao,Yuxiao Qiu,Xin Yan,Lei Zhu,Zhen Huang
DOI: https://doi.org/10.1016/j.applthermaleng.2023.121083
IF: 6.4
2023-07-05
Applied Thermal Engineering
Abstract:Polyoxymethylene dimethyl ethers (PODE) and methanol are promising alternative fuels for internal combustion engines, offering emission reduction and compatibility with existing engine combustion technologies. They can be chemically synthesized, providing a renewable and clean energy source for sustainable transportation. Additionally, dual-fuel spark-assisted compression ignition (SACI) is an advanced combustion mode that offers precise control of the combustion. However, there is limited research on dual-fuel SACI based on PODE and methanol, and the understanding of its multi-stage combustion, the cross-effects of multiple parameters, and the transition between ignition and compression ignition are still unclear. In this study, a modified gasoline engine was used to investigate the combustion characteristics of a dual-fuel SACI engine. The engine was fueled with direct injection PODE and port injection methanol. The combustion process was examined with a focus on the cooperative control of multiple parameters. The effects of the mass ratio of PODE, spark ignition timing, and start of injection timing were analyzed. The results demonstrated the presence of multiple heat-release stages during dual-fuel SACI combustion, involving both compression ignition and flame propagation ignition. An optimal interval between the start of injection timing and spark ignition timing was observed, leading to high brake thermal efficiency. This interval facilitated the formation of a highly reactive mixture during ignition, enabling efficient ignition of methanol by PODE. At a brake mean effective pressure of 0.8 MPa, a brake thermal efficiency of 44% was achieved with a 75% methanol ratio. Additionally, by appropriately increasing the mass ratio of PODE and advancing the start of injection timing, a significant reduction in hydrocarbon emissions was observed, albeit with a slight increase in nitrogen oxide emissions. These findings provide support for low-carbon operation of engines.
energy & fuels,engineering, mechanical,thermodynamics,mechanics