Abstract:Summary Lateral propagation of foam in heterogeneous reservoirs, where pore geometries vary laterally, depends on the roles of pore geometries on the foam properties. In this paper, the pore attributes of 12 different rock samples were characterized in terms of porosity, permeability, pore shape, pore size, throat size, aspect ratio, coordination number, and log mean of surface relaxation times (T2LM). These were measured from gas porosimeter and permeameter, X-ray microcomputed tomography (CT)-based pore-network models, thin-section photomicrographs, and nuclear magnetic resonance (NMR) surface relaxometry. The samples have a wide range of porosity: 12 to 29%; permeability: 1 to 5,000 md; average pore size: 3.7 to 9 μm; average throat size: 2.4 to 8 μm; average aspect ratio: 1 to 1.7; average coordination number: 2.6 to 5.2; and T2LM: 9.4 to 740 ms. Nitrogen foam flow experiments (without oil) were then conducted on each rock sample using a specialized coreflood apparatus. A graphical analysis of the coreflood data was used to estimate the total saturation of trapped foam (10 to 66%), flowing foam (3 to 14%), and apparent viscosity of foam (3.2 to 73 cp). Trapped foam saturation and apparent viscosity values were then correlated with each of the measured pore attributes. The results revealed that all pore attributes, except aspect ratio, have positive correlations with foam trapping and apparent viscosity. The best correlation with trapped foam saturation was obtained when the most influential pore attributes (pore size, throat size, aspect ratio, and coordination number) were combined into a single mathematical function. Foam apparent viscosity also appears to be mostly influenced by trapped foam saturation, permeability, and coordination number of pore systems. Trapping is also likely enhanced by the presence of fenestral or channel pores. Furthermore, the shape and angularity of pores seem to facilitate snap-off and trapping of foam, because rock samples with angular pores trapped the highest foam saturation compared with other samples with rounded and subrounded pores. It was also shown that the correlation between trapped foam saturation (and foam apparent viscosity) and the absolute permeability of porous media may reverse at some high-permeability values (greater than several darcies), when one or both of the following conditions exist: (1) The aspect ratio of a lower-permeability porous medium is lower than that of a higher-permeability porous medium, and (2) the coordination number of a lower-permeability porous medium is higher than that of a higher-permeability porous medium. Finally, T2LM showed a good correlation with foam trapping, making NMR logging a prospective tool for pre-evaluating foam performance in targeted reservoir sections.

The effect of rock microheterogeneity on steam foam rheology

The effect of rock composition and microstructure on steam foam rheology in sandstone reservoirs

Optimization of Steamflooding Heavy Oil Reservoirs

Insights on Flow Behavior of Foam in Unsaturated Porous Media During Soil Flushing.

Effects of Foam Microbubbles on Electrical Resistivity and Capillary Pressure of Partially Saturated Porous Media

Experimental Study on the Effect of Microheterogeneity on Multiphase Flow in a Microscopic Visualization Model

A Review of High‐Temperature Foam for Improving Steam Flooding Effect: Mechanism and Application of Foam

An experimental investigation of surfactant structure–property relationship for foam mobility control in thermal EOR processes

Foam Flow in Different Pore Systems—Part 1: The Roles of Pore Attributes and Their Variation on Trapping and Apparent Viscosity of Foam

Characteristics and Stabilization Mechanism of Three-Phase Foam: Improving Heavy Oil Recovery via Steam Stimulation through Two-Dimensional Visual Model

Effect of CO2 Concentration on the Performance of Polymer-Enhanced Foam at the Steam Front

Influence of Heterogeneity on Nitrogen Foam Flooding in Low-Permeability Light Oil Reservoirs

Foam Flow in Heterogeneous Porous Media: Effect of Cross Flow

Dynamic Behaviors and Mechanisms of Air-Foam Flooding at High Pressure and Reservoir Temperature via Microfluidic Experiments

Methane foam performance in oil-wet unconsolidated porous media: A systematic experimental investigation at reservoir conditions

Experimental Evaluation of Foam-Assisted Gas Injection in Proppant-Packed Fractured Oil-Wet Carbonate

Microvisual Investigation on Steam-Assisted Heavy Oil Extraction Behavior in Heterogeneous Porous Media

The foam reinforced with Janus amphiphilic graphene oxide to control steam channeling in heavy oil reservoir

Study on Formation and Migration Law of Foam in Fractures and Its Influencing Factors

Interfacial Rheology of Foam Stabilized by Nanoparticles and Their Retention in Porous Media

Pore-level mechanics of foam generation and coalescence in the presence of oil