Abstract:A glass fiber shell (GFS) and carbon fiber core (CFC) hybrid rod (HFRP) was produced through pultrusion technology for an alternative to traditional steel sucker rod for petroleum production. The mechanical properties of a really used HFRP rod closed to the ground (25 oC exposed temperature, 0.5 MPa hydraulic pressure and ∼70 kN cyclic loading) and in the deep oil-well up to 2600 meters (90 oC exposed temperature, 18 MPa hydraulic pressure and ∼50 kN cyclic loading) were investigated as a function of service time as long as 553 days. The mechanical, thermal properties and microanalysis tests of HFRP rods were conducted to obtain the long-term evolution of HFRP rods under the above service environments. Exposure closed to the ground caused a maximum degradation rate of short beam shear strength (SBSS) up to 18.92%. Meanwhile, the maximum degradation rates of interface shear strength (ISS) were 28.24% for carbon fiber/resin, 16.88% for glass fiber/resin and 36.07% for CFC/GFS interface. In comparison, exposure in the deep oil-well brought in an extra degradation rate from 4.34% to 11.11% for ISS, and the higher cyclic loading (∼70 kN) played an insignificant effect on the degradation. The degradation mechanism of mechanical properties for HFRP rods was attributed to plenty of bound water combined with the resin through the hydrogen bond and brought about the hydrolysis of resin and the increase of pore volume content (∼5%), leading to the debonding of fiber/resin. The long-term prediction of interface shear strength shows the degradations of CFC and CFC/GFS were more sensitive to the cyclic load (70 kN) compared to no cyclic load (0 kN), and an extra degradation rate up to 31.3% was observed compared to the no load condition, and the accelerated degradation was weakened with the increase of service temperature and hydraulic pressure. In addition, the exposure at the increased service temperature and hydraulic pressure in the deep oil-well led to an additional degradation rate of ISS in comparison to the ground exposure: 10.70% (CFC), 13.25% (CFC/GFS) and 4.81% (GFS).

Long-term service evaluation of a pultruded carbon/glass hybrid rod exposed to elevated temperature, hydraulic pressure and fatigue load coupling

Mechanical property evolution and service life prediction of pultruded carbon/glass hybrid rod exposed in harsh oil-well condition

Effects of elevated temperature, hydraulic pressure and fatigue loading on the property evolution of a carbon/glass fiber hybrid rod

EXPERIMENTAL RESEARCH ON IMPACT BEHAVIOR OF CONCRETE-FILLED STEEL TUBE AT ELEVATED TEMPERATURES

The Aging Behavior and Life Prediction of CFRP Rods under a Hygrothermal Environment

Influence of Immersion in Water under Hydraulic Pressure on the Interfacial Shear Strength of a Unidirectional Carbon/glass Hybrid Rod

Hygrothermal aging behavior of C/GFRP hybrid rod with bundle‐by‐bundle dispersion

Durability of Frp Concrete Bonds and Its Constituent Properties under the Influence of Moisture Conditions

Influence of Hygrothermal Aging on the Durability and Interfacial Performance of Pultruded Glass Fiber-Reinforced Polymer Composites

A comprehensive review on mechanical properties of pultruded FRP composites subjected to long-term environmental effects

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

Durability assessment of GFRP bars exposed to combined accelerated aging in alkaline solution and a constant load

Behavior of Cross Arms Inserted in Concrete-Filled Circular GFRP Tubular Columns

Creep-fatigue Properties and Deformation Mechanism of 316L Steel Fabricated by Laser Powder Bed Fusion (PBF-LB/M)

Effect of thermal and hydrothermal aging on the crashworthiness of carbon fiber reinforced plastic composite tubes

Service-life-prediction and field application of glass fiber-reinforced polymer tubular and solid bolts based on laboratory physical and mechanical assessment

Residual compressive strength of seawater sea sand concrete filled hybrid carbon-glass fibre reinforced polymer tubes under seawater: Effects of fibre type and orientation

Effect of Hydrothermal Environment on Mechanical Properties and Electrical Response Behavior of Continuous Carbon Fiber/Epoxy Composite Plates

Effects of Corrosive Environments on Properties of Pultruded GFRP Plates

Effect of sustained loads on the durability of GFRP bars with and without UHP-ECC cover

Experimental Study on the Flexural Creep Behaviors of Pultruded Unidirectional Carbon/Glass Fiber-Reinforced Hybrid Bars