Abstract:Although 4Ce4YSZ has high corrosion resistance, it faces challenges concerning its sinterability and ionic conductivity. Therefore, we studied destabilization behavior caused by corrosion and oxygen vacancy ordering according to ZnO doping. Powders of (4Ce4YSZ)1−x(ZnO)x (x = 0.5, 1, 2, 4 mol%) were synthesized using the sol-gel method. With the addition of ZnO, the cubic phase increased, and secondary phases were not observed. The (111) peak showed a higher angle shift in ZnO-doped 4Ce4YSZ compared to 4Ce4YSZ, and TEM-SAED revealed a reduction in the spacing of the (011)t plane, suggesting lattice contraction due to the substitution of the smaller Zn2+ (60 Å) for Zr4+ (84 Å) in the lattice. The local atomic structure analysis was conducted using EXAFS to investigate the oxygen vacancy ordering behavior. Zr K-edge Fourier transform data revealed a decrease in the Zr-O1 peak intensity with an increasing amount of ZnO doping, indicating an increase in oxygen vacancies. The Zr-O1 peak position shifted to the right, leading to an increase in the Zr-O1 interatomic distance. In the Y K-edge Fourier transform data, the Y-O1 peak intensity did not decrease, and there was little variation in the Y-O1 interatomic distance. These results suggest that the oxygen vacancies formed due to ZnO doping are located in the neighboring oxygen shell of Zn, rather than in the neighboring oxygen shells of Y and Zr. Impedance measurements were conducted to measure the conductivity, and as the amount of ZnO doping increased, the total conductivity increased, while the activation energy decreased. The increase in oxygen vacancies by ZnO doping contributed to the enhancement of conductivity, and it is considered that these created oxygen vacancies did not interact with Zn2+ and did not form defect associations. Fluoride-based molten salts were introduced to the specimens to assess the corrosion behavior in a molten salt environment. Yttrium depletion layers (YDLs) were formed on the surfaces of all specimens due to the leaching of yttrium. However, Ce remained relatively stable at the interface according to EDS line scans, suggesting a reduction in the phase transformation (cubic, tetragonal to monoclinic) typically associated with yttrium leaching in YSZ.

DC electrical degradation of YSZ: Voltage‐controlled electrical metallization of a fast ion conducting insulator

DC Electrical Degradation of YSZ: Voltage Controlled Electrical Metallization of A Fast Ion Conducting Insulator

DC resistance degradation of SrTiO 3 : The role of virtual‐cathode needles and oxygen bubbles

DC Resistance Degradation of SrTiO$_3$: The Role of Virtual-Cathode Needles and Oxygen Bubbles

Microstructure, optical and electrical properties of solution-derived peroxo-zirconium oxide gate dielectrics for CMOS application

Electric field-induced grain boundary degradation mechanism in yttria stabilized zirconia

Multiscale Defect Responses in Understanding Degradation in Zinc Oxide Varistor Ceramics

Thermal Stability of Reliable Polycrystalline Zirconium Oxide for Nonvolatile Memory Application

Understanding Of Dc Degradation Of Zno Varistor Ceramics From The Aspect Of High-Temperature Relaxation

Electrical and Hydrogen Reduction Enhances Kinetics in Doped Zirconia and Ceria: II. Mapping Electrode Polarization and Vacancy Condensation in YSZ

Degradation of zirconia in moisture

Study of Deformation Mechanisms in Flash-Sintered Yttria-Stabilized Zirconia by In-Situ Micromechanical Testing at Elevated Temperatures

Theoretical Study on the Influence of the Anharmonic Effect on the Ionic Conductivity and Thermal Stability of 8 mol% Yttria-Stabilized Zirconia Solid Electrolyte Material

Structural self-deterioration mechanism for zirconium diboride in an inert environment

Microstructural Degradation of Ni/YSZ Electrodes in Solid Oxide Electrolysis Cells under High Current

Evaluation of Feasibility on Dental Zirconia-Accelerated Aging Test by Chemical Immersion Method

High Temperature Mechanical Properties of Zirconia Metastable T '-Phase Degraded Yttria Stabilized Zirconia

DC Aging Mechanism of Co2O3-Doped ZnO Varistors

Oxygen Vacancy Ordering and Molten Salt Corrosion Behavior of ZnO-Doped CeYSZ for Solid Oxide Membranes

STABILITY OF SUB-MICRON SIZED CRYSTAL STRUCTURE YTTRIA STABILIZED ZIRCONIA ELECTROLYTE

In-situ high temperature micromechanical testing of ultrafine grained yttria-stabilized zirconia processed by spark plasma sintering