Abstract:The authors have studied the effect of alloying on the structure, microhardness and abrasive wear resistance of electroslag surfacing layers on low-alloy structural steel 09G2S. For modification, mixtures of Si3 N4 + FeSi2 + Si powders obtained in the Department of Structural Macrokinetics of the Tomsk Scientific Centre SB RAS by the method of SHS synthesis, as well as powder compositions based on TiC, were used. A molten electrode was made of low-alloy steel St3, on which modifying compositions Si3 N4 + FeSi2 + Si were poured out, in the first case, and modifying compositions Si3 N4 + FeSi2 + Si, located below, in the second case. Metallography and X-ray microanalysis methods were used to determine the structure and to analyze the composition of the deposited layers, heat-affected zone (HAZ) and the base metal, on the basis of which assumptions were made about the nature of the formation of coating properties – hardness and wear resistance. It is shown that the main influence on the wear resistance is exerted by structure of the surfacing metal. There is a positive effect of modifying coatings by alloying materials with the alloys Si3 N4 + FeSi2 + Si + St3 and TiC + St3. In the molten layer, many new crystallization centers are released in the form of dispersed TiC particles. Dispersed TiC particles with a high melting point (3180 °C) are the first to fall out of the melt and not only serve as multiple crystallization centers, but also prevent the growth of austenitic grains, which ensures the formation of dispersed structure. The coatings contain TiC carbide particles, as well as inclusions of other phases. At the same time, an increase in hardness of the deposited layer containing titanium carbide inclusions is observed in direction of the boundary with the base. Wear resistance of the layer increases when a TiC-based coating is formed. The obtained data can be used to create deposited layers on the metal surface with high resistance against abrasive wear.

Structure and Tribological Properties of the Wear-Resistant Coatings Deposited Using Flux-Cored Wires Modified by Tantalum and Tungsten

High Temperature Erosion Properties of Arc-Sprayed Coatings Using Various Cored Wires Containing Ti–Al Intermetallics

Methods of Investigation of the Deposited Metal Properties and Their Application for the Development of Flux Cored Wires

Assessment of tribotechnical properties and resistance to wear of plasma coatings

Influence of Tantalum Addition on the Microstructure and Wear Resistance Properties of NiCuBSi/65WC Composite Coatings

Microstructure and Wear Properties of Nanostructured Coatings Prepared by Wire Arc Spray

Influences of the Microstructure on the Wear Resistance of Cobalt-Based Alloy Coatings Obtained by Plasma Transferred Arc Process

Enhanced Fracture Toughness of WC-CoCr Thermally Sprayed Coatings by the Addition of NiCrFeSiBC and Mo and Its Influence on Sliding Wear Behavior

Microstructure and wear resistance of Fe-Cr-C-Mo-V-Ti-N hardfacing layers

Comparison of Wear Resistance of Overlay Welded Layers and Thermal Sprayed Coatings in Real Conditions

Modification of steel surface layer by electroslag surfacing using compounds with high melting point

Influence of nano-sized WC addition on the microstructure, residual stress, and tribological properties of WC-Co HVAF-sprayed coatings

Microstructure and Properties Characterization of WC-Co-Cr Thermal Spray Coatings

Wear-resistance Performance of Spray-welding Coating by Plasma Weld-surfacing

Microstructure and Tribology Behaviors of In-Situ WC/Fe Carbide Coating Fabricated by Plasma Transferred Arc Metallurgic Reaction

Design, Manufacturing, Microstructure, and Surface Properties of Brazed Co-Based Composite Coatings Reinforced with Tungsten Carbide Particles

High Temperature Tribological Performance of Steel/Copper Friction Pairs Lubricated with a Modified C-WS2-(Fe3O4 + TiN) Nanoadditives in Non-Copper Coated Solid Wires

Tribological and Corrosion Behaviors of Zr-doped Graphite-Like Carbon Nanostructured Coatings on Ti6Al4V Alloy

Tribological properties and corrosion behavior of AC-HVAF sprayed nanostructured NiCrCoAlY-TiB2 coatings

Strengthening Mechanism and Properties of Co–WC Composite Coatings Deposited by Plasma‐transferred Arc Welding

Tribological and Corrosion Behavior of HVAF-sprayed (Fe-Tib2)/cnt Composite Coating