Abstract:Current materials engineering trends put forward the development of efficient structural solutions. The steel replacement with fiber-reinforced polymers (FRP) exemplifies the key to the corrosion problem. However, the relatively low deformation modulus of typical FRP materials raises the deformations of the structural components. Together with the self-weight reduction increasing the kinematic displacements, the latter issue makes developing hybrid structures comprising compression-resistant concrete and high-performance in tension FRP profiles important. Although such hybrid systems are applicable for bridge engineering, the uncertainty of the inter-component bonding properties complicates developing these innovative structures, including the design models. The typical solution focuses on the local bond improvement, e.g., employing FRP profile perforation and mechanical anchorage systems. However, this study introduces an alternative solution, using the stress-ribbon bridge structural system for creating the hybrid beam prototype, which combines the synthetic fiber-reinforced concrete slab and pultruded FRP profile fixed on the supports. This work exemplifies the structural development concept when the finite element (FE) modeling outcome defines the target reference of the design procedure. Thus, on the one hand, this innovative structure simplifies the corresponding numerical (FE) model, which assumes the perfect bond between the components of the hybrid beam system. On the other hand, the solution to the support problem (resulting from a low resistance of pultruded FRP profiles to transverse loads) improves the structural performance of the bridge prototype, doubling the structure's flexural stiffness and load-bearing capacity regarding the weak concrete supports' system. The bending tests proved the adequacy of this solution in describing the design reference for further development of the proposed structural concept.

Modeling Structure of Portable River Bridge using Fiber – Reinforced Polymer (FRP)

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Innovating arch structures with fiber-reinforced polymer composites: A review

Performance Monitoring of Damaged Bridge Members Strengthened with Carbon Fiber Reinforced Polymer

A Comprehensive Study on CFRP Rapid Portable Bridge: Design, Experimental Investigation and Finite Element Analysis

Modeling Strategies of Finite Element Simulation of Reinforced Concrete Beams Strengthened with FRP: A Review

Developing a hybrid FRP-concrete composite beam

Reliability-Based Evaluation of Flexural Members Strengthened with Externally Bonded Fiber-Reinforced Polymer Composites

Review of Experimental Studies on Application of FRP for Strengthening of Bridge Structures

LRFD Approach to CFRP Renewal of Prestressed Concrete Cylinder Pipes

Roofs And Bridges Made Of Fiber-Reinforced Polymer

Parametric design and dynamic analysis of a hybrid steel‐FRP bridge.

Advanced fiber reinforced polymer composites for sustainable civil infrastructures

Additive Fabrication of Large-Scale Customizable Formwork Using Robotic Fiber-Reinforced Polymer Winding

Novel Bamboo-Raft-type Floating Structure (BRT-FS) Assembled by FRP Reinforced Concrete Tubes: Conceptual Design and Analysis

All FRP and FRP-concrete hybrid components for bridges: Experiments, theories and case study

The Linear Optimization Based on Static Analysis of Lightweight Frp Mobile Bridge

Connections and Structural Applications of Fibre Reinforced Polymer Composites for Civil Infrastructure in Aggressive Environments

Global and Local Fiber Optic Sensors for Health Monitoring of Civil Engineering Infrastructure Retrofit with FRP Materials

Universal Bond Models of FRP Reinforcements Externally Bonded and Near-Surface Mounted to RC Elements in Bending

Enhancement of Bond Performance of Advanced Composite Materials Used in Cable Bridge Structures Based on Tensile Tests