Abstract:Current materials engineering trends put forward the development of efficient structural solutions. The steel replacement with fiber-reinforced polymers (FRP) exemplifies the key to the corrosion problem. However, the relatively low deformation modulus of typical FRP materials raises the deformations of the structural components. Together with the self-weight reduction increasing the kinematic displacements, the latter issue makes developing hybrid structures comprising compression-resistant concrete and high-performance in tension FRP profiles important. Although such hybrid systems are applicable for bridge engineering, the uncertainty of the inter-component bonding properties complicates developing these innovative structures, including the design models. The typical solution focuses on the local bond improvement, e.g., employing FRP profile perforation and mechanical anchorage systems. However, this study introduces an alternative solution, using the stress-ribbon bridge structural system for creating the hybrid beam prototype, which combines the synthetic fiber-reinforced concrete slab and pultruded FRP profile fixed on the supports. This work exemplifies the structural development concept when the finite element (FE) modeling outcome defines the target reference of the design procedure. Thus, on the one hand, this innovative structure simplifies the corresponding numerical (FE) model, which assumes the perfect bond between the components of the hybrid beam system. On the other hand, the solution to the support problem (resulting from a low resistance of pultruded FRP profiles to transverse loads) improves the structural performance of the bridge prototype, doubling the structure's flexural stiffness and load-bearing capacity regarding the weak concrete supports' system. The bending tests proved the adequacy of this solution in describing the design reference for further development of the proposed structural concept.

The Linear Optimization Based on Static Analysis of Lightweight Frp Mobile Bridge

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Finite Element Analysis of Mechanical Behavior of Light-Weight Mobile FRP Bridge

Design and Dynamical Analysis of New Light Deployable Bridge

OPTIMIZATION OF STAYED-BUCKLE CABLE FORCES DURING ADJUSTMENT OF THE LINE-SHAPE ON LONG SPAN ARCH BRIDGE

Stability Analysis of Yinxian Second Bridge

Nonlinear Optimization of Orthotropic Steel Deck System Based on Response Surface Methodology

DYNAMIC ANALYSIS AND OPTIMIZATION DESIGN OF PLATFORM FRAME CONSTRUCTION

Study on dynamic characteristics of light-weight FRP footbridge

Analysis and assessment of articulated skew hollow slab beam bridge

Optimization design and analysis of mobile pump truck frame using response surface methodology

Research on dynamic detection method of bridge vehicle load based on optimization algorithm

RBF-Based Integrated Optimization Method of Structural and Turning Parameters for Low-Floor Axle Bridge

Flexural properties of a lightweight hybrid FRP-aluminum modular space truss bridge system

Nonlinear Finite Element Analysis for a Prestressed Continuous Rigid Frame Concrete Bridge

Design and field evaluation of a hybrid FRP composite – Lightweight concrete road bridge

Structural Optimization Design of Steel Tubular Arched Bridge Based on APDL

All FRP and FRP-concrete hybrid components for bridges: Experiments, theories and case study

Research on the Optimization of Automobile Plastic Front Frame Structure

A Comprehensive Study on CFRP Rapid Portable Bridge: Design, Experimental Investigation and Finite Element Analysis

Developing a hybrid FRP-concrete composite beam