Abstract:Advances in Mechanical Engineering, Volume 16, Issue 9, September 2024. As urbanization continues to accelerate, dump trucks assume an increasingly important role in the transportation and construction of infrastructure. The carriage represents a critical structural assembly of dump trucks. One of the primary failure modes of the carriage is weld fatigue failure, which frequently gives rise to the problem of weld fatigue cracking during transportation. To increase the fatigue life of welds and enhance the degree of structural lightweight of a heavy dump truck carriage, a method for anti-fatigue lightweight design based on machine learning and multi-objective optimization is proposed. A high-fidelity finite element model of the carriage is established for static simulation analysis of the typical conditions. Based on the virtual reliability simulation test of the dump truck and the equivalent structural stress method, the fatigue life of the critical welds in the carriage is calculated. The important part thicknesses are selected as design variables through the comprehensive contribution analysis method. The maximum displacement and maximum stress under the dangerous condition are considered as constraints. The mass of the carriage and the minimum fatigue life of the critical welds are considered as optimization objectives. The GA-XGBoost machine learning approximation models (GA-XGBoost-MLAM) and NSGA-II algorithm are employed for multi-objective optimization design of the carriage. The entropy weighted TOPSIS method is utilized for multi-objective decision-making of Pareto solutions. The design after optimization and decision-making shows that, while satisfying the requirements of static structural performance, the minimum fatigue life mileage of the critical welds of the carriage is increased by 157,570 km, representing an increase of 36.58%. Additionally, the mass of the carriage is reduced by 295.69 kg, representing a decrease of 9.47%. Therefore, the proposed design method achieves a good effect in the anti-fatigue lightweight of dump truck carriage.

Optimization design and analysis of mobile pump truck frame using response surface methodology

Numerical study on the forward and inverse problems of the mobile pump truck frame

Structural Analysis of Agricultural Truck Frame Based on the Finite Element Method

Lightweight design of truck frame

Optimized Lightweight Frame for Intelligent New-energy Vehicles

Lightweight design of aircraft truss based on topology and size optimization

Design and Optimization of Retractable Frame for High Flow Water Supply and Drainage Truck

Lightweight Design of Forklift Frame Based on Guide Weight Method

Multi-condition combined topology optimization design of electric truck aluminum alloy frame based on subjective and objective interactive weights

Multi-condition classification optimization of subframe of dust suppression vehicle

Multi-objective optimization design for anti-fatigue lightweight of dump truck carriage combined with machine learning

Analysis and optimization of the front subframe of vehicle

Topology optimization-based lightweight design of a certain tubular beam subframe

A performance-driven lightweight optimization method for material-structure coupling design of cab

Application of the preference selection index method in multi-objective lightweight design of heavy commercial vehicle frames

Finite Element Analysis and Optimization for Static and Dynamic Characteristics of Diesel Forklift Frame

Research on the Optimization of Automobile Plastic Front Frame Structure

A Hybrid Multi-Objective Optimization Method Based on NSGA-II Algorithm and Entropy Weighted TOPSIS for Lightweight Design of Dump Truck Carriage

CRASHWORTHINESS OPTIMIZATION OF AUTOMOTIVE FRAME USING RESPONSE SURFACE METHODOLOGY

Optimization of Baja Racing Car Frame Based on GA/MOGA/SA Algorithm and Experimental Research on Bending-torsional Stiffness of Frame

Nonlinear Optimization of Orthotropic Steel Deck System Based on Response Surface Methodology