Abstract:Traditional timber bridges designs, while economical and durable, often have difficulty producing adequate stiffness for longer spans. Addition of FRP reinforcement has been shown to improve stiffness to a limited extent, but not nearly as much as it improves strength. To address the stiffness issue, a combined analytical/experimental pilot study is being conducted on a reinforced FRP glulam/concrete composite beam section. The section consists of a glued-laminated beam reinforced on the tension face with E-glass fiber reinforced composite. On the compression face, lag screws were driven into the wood beam before pouring the concrete slab to make the glulam beam and concrete slab composite. The stiffness of the beam was modeled using first order shear deformation theory based on available material properties. The load-deflection ratio was predicted for the limit case of a fully composite concrete slab and the limit case of no concrete slab. A nonlinear model based on moment-curvature analysis was developed and run to help quantify the increased strength and stiffness of the composite beam. An experimental program has been designed to better quantify the beam response and determine whether the strength and stiffness gained through the addition of the concrete in the compression zone sufficient to make up for the additional dead load. The wood used in the glulam was eastern hemlock, a low grade but abundant New England species. A longitudinal E-glass reinforcement mat was bonded to the wood with a phenolic adhesive through the wet lay up method. In order to control shear failure, some of the specimens were wrapped at the ends with additional E-glass shear reinforcement. To date, one beam has been loaded in three point bending within the linearly elastic range, and the results indicate that the stiffness gains are significant. Future tests will examine failure modes and the effects of shear reinforcing, as well quantifying strength gains based on economical amount of FRP reinforcing.

Parametric design and dynamic analysis of a hybrid steel‐FRP bridge.

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Numerical Simulations of Multilayer Surfacing Systems on Orthotropic Steel Deck Bridges

Trysfjord bridge, parametric analysis and modelling for drawingless construction of a concrete balanced cantilever bridge

Design and field evaluation of a hybrid FRP composite – Lightweight concrete road bridge

Mechanical behavior of HFRC bridge deck for composite bridge

Developing a hybrid FRP-concrete composite beam

APPLICATION OF PARAMETRIC DESIGN IN PROJECT CONTAINING STEEL STRUCTURES: PARAMETRIC LIGHT‐RAIL STEEL BRIDGE

A Systematic Analysis and Design Approach for Single-Span FRP Deck/stringer Bridges

Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

A parametric approach for creating finite element models from point clouds for steel superstructure components in steel girder bridges

A Practical Design Analysis Method For Short-Span Fiber-Reinforced Composite Bridges

Analysis and design of fiber reinforced plastic composite deck-and-stringer bridges

All FRP and FRP-concrete hybrid components for bridges: Experiments, theories and case study

Structural Analysis and Optimization of an Advanced All-Gfrp Highway Bridge

FRP-Wood-Concrete Composite Bridge Girders

Modeling and Testing of a Composite Steel-Concrete Joint for Hybrid Girder Bridges

Deconstructable variable stiffness shear connectors in FRP deck resting on multigirder bridge system: Analytical model

Dynamic Analysis and Design Parameter Optimization for Abnormal-Shaped Pedestrian Bridge with Steel Box Girder

Design and Validation of a Fiber-Reinforced Polymer Cable-Stayed Pedestrian Bridge: Human-Induced Actions vs. Comfort Levels

Parametric Design: formal and structural connection for a pedestrian bridge in the archeological area of Roca Vecchia (IT)