Abstract:Regarding the limited fossil fuel reserves, the renewable ethanol has been considered as one of the substitutional fuels for spark ignition (SI) engines. But due to its high latent heat, ethanol is usually hard to be well evaporated to form the homogeneous fuel–air mixture at low temperatures, e.g., at idle condition. Compared with ethanol, hydrogen possesses many unique combustion and physicochemical properties that help improve combustion process. In this paper, the performance of a hydrogen-enriched SI ethanol engine under idle and stoichiometric conditions was investigated. The experiment was performed on a modified 1.6 L SI engine equipped with a hydrogen port-injection system. The ethanol was injected into the intake ports using the original engine gasoline injection system. A self-developed hybrid electronic control unit (HECU) was adopted to govern the opening and closing of hydrogen and ethanol injectors. The spark timing and idle bypass valve opening were governed by the engine original electronic control unit (OECU), so that the engine could operate under its original target idle speed for each testing point. The engine was first fueled with the pure ethanol and then hydrogen volume fraction in the total intake gas was gradually increased through increasing hydrogen injection duration. For a specified hydrogen addition level, ethanol flow rate was reduced to keep the hydrogen–ethanol–air mixture at stoichiometric condition. The test results showed that hydrogen addition was effective on reducing cyclic variations and improving indicated thermal efficiency of an ethanol engine at idle. The fuel energy flow rate was reduced by 20% when hydrogen volume fraction in the intake rose from 0% to 6.38%. Both flame development and propagation periods were shortened with the increase of hydrogen blending ratio. The heat transfer to the coolant was decreased and the degree of constant volume combustion was enhanced after hydrogen addition. HC and CO emissions were first reduced and then increased with the increase of hydrogen blending fraction. The acetaldehyde emission from the hydrogen-enriched ethanol engine is lower than that from the pure ethanol engine. However, the addition of hydrogen tended to increase NOx emissions from the ethanol engine at idle and stoichiometric conditions.

Comparative study on combustion and emission characteristics of methanol/hydrogen, ethanol/hydrogen and methane/hydrogen blends in high compression ratio SI engine

Engine Performance and Emissions of A Compression Ignition Engine Operating on the Diesel-Methanol Blends

Combustion and Emission Characteristics of a DI Diesel Engine Fueled by Diesel-Methanol Blends

Numerical Comparative Study on Performance and Emissions Characteristics Fueled with Methanol, Ethanol and Methane in High Compression Spark Ignition Engine

Numerical comparative analysis on performance and emission characteristics of methanol/hydrogen, ethanol/hydrogen and butanol/hydrogen blends fuels under lean burn conditions in SI engine

Experimental and numerical study on a SI engine fueled with gasohol and dissociated methanol gas blends at lean conditions

Study on Combustion Characteristics of a DI Diesel Engine Operating on Diesel/Methanol Blends

Experimental Study on the Performance, Combustion and Emission Characteristics of A High Compression Ratio Heavy-Duty Spark-Ignition Engine Fuelled with Liquefied Methane Gas and Hydrogen Blend

Combustion and emissions characteristics of a spark-ignition engine fueled with hydrogen–methanol blends under lean and various loads conditions

Experimental study on the performance of a high compression ratio SI engine using alcohol/ammonia fuel

Numerical Study on a Diesel/Dissociated Methanol Gas Compression Ignition Engine with Exhaust Gas Recirculation

Effect of Hydrogen Addition on Combustion and Emissions Performance of a Spark-Ignited Ethanol Engine at Idle and Stoichiometric Conditions

Comparative Study on Combustion and Emission Characteristics of Methanol, Ethanol and Butanol Fuel in TISI Engine

Experimental Study on Combustion and Emission Characteristics of a Lean Burn Engine Fueled with Methanol/Gasoline

Effects of hydrogen direct injection on combustion and emission characteristics of a hydrogen/Acetone-Butanol-Ethanol dual-fuel spark ignition engine under lean-burn conditions

Comparative and Numerical Evaluation of Methanol Blends in CI Diesel Engine

Experimental Study on Ammonia-Methanol Combustion and Emission Characteristics in a Spark Ignition Engine

Evaluation on Combustion and Lean-Burn Limit of a Medium Compression Ratio Hydrogen/methanol Dual-Injection Spark-Ignition Engine under Methanol Late-Injection

Numerical comparative study on knocking combustion of high compression ratio spark ignition engine fueled with methanol, ethanol and methane based on detailed chemical kinetics

Effects of Methanol/Gasoline Blends on a Spark Ignition Engine Performance and Emissions

Experimental Study the Effects of Various Compression Ratios and Spark Timing on Performance and Emission of a Lean-Burn Heavy-Duty Spark Ignition Engine Fueled with Methane Gas and Hydrogen Blends