Abstract:Silty soil is commonly utilized in construction or road foundations. One of the main geotechnical concerns associated with silty soil is its insufficient strength and susceptibility to liquefaction, which can lead to soil collapse under external loads or its own weight. In-situ chemical stabilization techniques, such as grouting, are favorable for enhancing the mechanical behavior of the soil. However, their application to silty soil is limited due to their low permeability. This study aims to develop a permeable polyurethane (PP) material for grouting to improve the mechanical properties of low-permeability silty soil. An orthogonal test was conducted to analyze the effects of injection pressure , dry density, water content, and curing time on the mechanical properties of silty soil after grouting (PU-SS). Comprehensive studies were carried out on the internal acoustic characteristics and surface deformation of the consolidated soil under uniaxial compression. Finally, considering the effect of water content on compressive strength,the damage constitutive model of consolidated was established. The results indicate that PP can increase the compressive strength of the silty soil up to 5 MPa. Water content emerges as the primary factor influencing the compressive strength of the consolidated soil, with a decrease in strength as water content increases. The digital surface deformation monitoring technique accurately captured the surface strain characteristics, revealing a relatively uniform surface strain distribution pre-peak stress. Subsequently, a deformation concentration zone formed, evolving into a localized deformation band, inducing shear slip along the fractured surface. The acoustic emission (AE) signal proved significant only during the damage stage. The established statistical damage model effectively characterizes the pre-yield and post-yield stages of consolidated soil, accounting for the influence of water content. In conclusion, the findings suggest that permeable polymer (PP) is more effective in improving the mechanical properties of low-permeability silty soil compared to grouting materials like cement, water glass, and silica sol. Expanding on these results, permeable polymers have potential applications in various areas, including preventing seepage and reinforcing soil embankments, strengthening highway subgrades, and fortifying building foundations.

Micro-Level Analysis of Marine Clay Stabilised with Polyurethane

Investigation on the Optimal Formulation and Mechanism of Marine Organic Silt Improved with Magnesium-Cement-based Stabilizer

Evaluating the toxicity of polyurethane during marine clay stabilisation

Effect of Surface Modification of Montmorillonite on the Properties of Rigid Polyurethane Foam Composites

Study Of Strength Characteristics Of Stabilized Soil By Using Stabilizing Agent Gx08 Treating Marine And Lacustrine Soft Soil In Hangzhou

Stabilization Nature and Unified Strength Characterization for Cement-Based Stabilized Soils

Interactions Between Organic and Inorganic Phases in PA- and PU/PA-Modified-Cement-Based Materials

Study on Mechanism of Muddy Soil Stabilization

Performance evaluation and stabilization mechanism of red clay treated with polyurethane

Microstructure Behaviour of the Marine Clay Treated with Geopolymer

Effect of Stabilization/solidification on Mechanical and Phase Characteristics of Organic River Silt by a Stabilizer

Experimental Study on Mechanical Behavior of Sand Improved by Polyurethane Foam

Marble Powder as a Soil Stabilizer: An Experimental Investigation of the Geotechnical Properties and Unconfined Compressive Strength Analysis

Alternative Ground Improvement Solution with Polyurethane Foam/Resin

Analysis of strength development in non-traditional liquid additive-stabilized laterite soil from macro- and micro-structural considerations

Influence of polyurethane in the polymerization process for poorly graded sand stabilization and cementing

The Implementation of Industrial Byproduct in Malaysian Peat Improvement: A Sustainable Soil Stabilization Approach

Experimental study on the mechanical behaviour of silty soil stabilized with polyurethane

Effect of Polyurethane on the Stability of Sand–clay Mixtures

Pore fluid salinity effects on post-stabilization performance of cement-treated Marl

Effect of UFC on the Microscopic Pore Structure of Cemented Soil in Humic Acid Environment