Abstract:Si/SiO2@C anode materials have great application in lithium-ion batteries (LIBs). Herein, Si/SiO2 has been prepared by a facile method from abundant natural silica diatomite. The obtained material consists of mixed nanodomains of Si and SiO2. The Si/SiO2 has been further coated with lignin-derived carbon to prepare a Si/SiO2@C material. The asprepared Si/SiO2@C material shows a homogeneous carbon coating with a thickness of approximate to 5nm and improved cycling performance as well as rate capability compared to the Si/SiO2 material. At a commercial level, an areal capacity of approximate to 2.5 mAh cm(-2) and a pressing density of 1.3 g cm(-3), the Si/SiO2@C anode exhibits stable cycling performance with 87.1% capacity retention after 150 cycles in a half cell. In full cell configuration paired with a Li[Ni0.8Co0.1Mn0.1]O-2 cathode, a prelithiation method based on the electrical shorting of the Si/SiO2@C electrode with lithium foil is introduced. The initial Coulombic efficiency of the full cell is effectively improved and reaches 85.4%, and the excellent reversibility enables robust full cell operations. After 100 cycles at 0.2 C, 91.3% capacity retention is achieved. The exceptional electrochemical performance is due to the synergistic effects of the Si/SiO2 composite nanostructure from the facile synthesis method and carbon coating from lignin. This work presents a green approach for fabricating high-performance Si/SiO2@C anodes from sustainable feedstocks, with significant application potential in LIBs.

Communication—Self-Template Fabrication of Porous Si/SiOx/C Anode Material for Lithium-Ion Batteries

Three-dimensional Dual-Layered Conductive Binder Enables Stable and High Performance of SiOx/C Anodes

Interfacial engineering of porous SiOx@C composite anodes toward high-performance lithium-ion batteries

A Hybrid Structure to Improve Electrochemical Performance of SiO Anode Materials in Lithium-Ion Battery

Long-cycle and High-rate Si/SiOx/Nitrogen-doped Carbon Composite as an Anode Material for Lithium-ion Batteries

Insight into the performance of the mesoporous structure SiOx nanoparticles anchored on carbon fibers as anode material of lithium-ion batteries

Engineering Molecular Polymerization for Template‐Free SiOx/C Hollow Spheres As Ultrastable Anodes in Lithium‐Ion Batteries

Facile Electrospun Sio/Carbon Nanofibrous Anode Materials for Lithium-Ion Battery with Excellent Stability

One-step Synthesis of Uniformly Distributed SiOx-C Composites As Stable Anodes for Lithium-Ion Batteries.

An Effective Strategy on Synthesizing a Stable SiOx‐Based Anode for High Density Lithium‐Ion Batteries

Batch-Scale Synthesis and Interfacially Enhanced Stability of Silicon Suboxide-Based Anodes toward High-Performance Lithium-Ion Batteries

Facile synthesis of SiOx/C as high-performance anodes for lithium-ion batteries

Green Design of Si/SiO<sub>2</sub>/C Composites as High-Performance Anodes for Lithium-Ion Batteries

Carbon Uniformly Distributed Siox/C Composite with Excellent Structure Stability for High Performance Lithium-Ion Batteries

Bio-template Induced SiOx Nanoparticles Dispersed in Carbon with Enhanced Li Storage Performance

Facile preparation of silicon/carbon composite with porous architecture for advanced lithium-ion battery anode

Nano-sized SiOx/C Composite Anode for Lithium Ion Batteries

Preparation of Silicon Oxide-Carbon Composite with Tailored Electrochemical Properties for Anode in Lithium-Ion Batteries

A novel strategy for the synthesis of highly stable ternary SiOx composites for Li-ion-battery anodes

Porous Carbon-Coated Silicon Composites for High Performance Lithium-Ion Batterie Anode

Disproportionated SiOx/C composite anode materials for lithium-ion batteries