Abstract:The nail penetration experiment has become one of the commonly used methods to study the short circuit in lithium-ion battery safety. A series of penetration tests using the stainless steel nail on 18,650 lithium iron phosphate (LiFePO4) batteries under different conditions are conducted in this work. The effects of the states of charge (SOC), penetration positions, penetration depths, penetration speeds and nail diameters on thermal runaway (TR) are investigated. And the accelerating rate calorimeter is applied to reveal the thermal runaway mechanism. The experimental results show that the higher the SOC of the battery, the higher the possibility and risk of TR of the battery, and there seems to be a critical penetration depth where TR occurs. The battery exhibits higher average temperature at higher penetration speeds. Whether the battery get into TR is not related to the penetration speed. When the penetration location near the positive pole and negative pole,the risk of thermal runaway is much higher than the centre position of the battery. The larger the diameter of the nail, the lower the overall temperature of the battery. What's more, the results of the penetration tests under the condition of parameter coupling shows that the average temperature of battery are greatly affected by the parameters of SOC, penetration position. The temperature of the LiFePO4 battery is within 200°C when the TR occurs induced by the penetration, which is mainly due to the incomplete exothermic reaction inside the battery.

What problem does this paper attempt to address?

### Problems the paper attempts to solve This paper aims to study the thermal runaway behavior of lithium iron phosphate batteries (LiFePO₄ batteries) in penetration experiments. Specifically, through a series of penetration experiments, the author explores the influence of different conditions on thermal runaway, in order to reveal the mechanism of thermal runaway and provide experimental basis for improving the safety of LiFePO₄ batteries. ### Research background Lithium - ion batteries (LIBs) are widely used in electronic devices because of their high energy density, low self - discharge rate, no memory effect and excellent cycle performance. However, under abuse conditions (such as aging, over - charging, over - discharging, over - heating, penetration and extrusion, etc.), lithium - ion batteries may experience thermal runaway, leading to safety hazards. In particular, in recent years, thermal runaway accidents of LiFePO₄ batteries caused by internal short - circuits have occurred frequently, indicating that LiFePO₄ batteries also have safety risks. ### Research purposes In this paper, through penetration experiments, the following factors' influence on the thermal runaway behavior of LiFePO₄ batteries are systematically studied: 1. **State of charge (SOC)**: Study the thermal runaway risk of batteries at different SOCs. 2. **Penetration position**: Study the thermal runaway behavior when the penetration point is located at the positive electrode, negative electrode or center of the battery. 3. **Penetration depth**: Study the influence of different penetration depths on thermal runaway and determine whether there is a critical penetration depth. 4. **Penetration speed**: Study the influence of different penetration speeds on thermal runaway. 5. **Nail diameter**: Study the influence of nails with different diameters on thermal runaway. ### Main findings - **Influence of SOC**: The higher the SOC, the greater the possibility and risk of thermal runaway of the battery. For a battery with an SOC of 100%, the maximum temperature after penetration can reach approximately 135.78 °C. - **Influence of penetration position**: The risk of thermal runaway near the positive and negative electrodes is significantly higher than that at the center of the battery. When near the positive electrode, the peak temperature is approximately 222.5 °C, while when near the negative electrode, the peak temperature is approximately 187.6 °C. - **Influence of penetration depth**: There is a critical penetration depth (about 12 mm). When the penetration depth exceeds this value, the battery will experience thermal runaway. - **Influence of penetration speed**: Penetration speed has no significant influence on the occurrence of thermal runaway, but a higher penetration speed will lead to an increase in the average temperature of the battery. - **Influence of nail diameter**: The larger the nail diameter, the lower the overall temperature of the battery, because a larger nail diameter means a larger heat dissipation area. ### Conclusion Through the study of these parameters, the author reveals the thermal runaway behavior and its internal mechanism of LiFePO₄ batteries under different penetration conditions. These research results are helpful for understanding the thermal runaway characteristics of LiFePO₄ batteries and provide experimental basis for improving their safety.

Thermal Runaway Behavior of Lithium Iron Phosphate Battery During Penetration

Thermal runaway procedure and residue analysis of LiFePO4 batteries with different charging states under nail penetrating

Thermal Runaway Evolution of a 280 Ah Lithium-Ion Battery with LiFePO4 As the Cathode for Different Heat Transfer Modes Constructed by Mechanical Abuse

Failure Mechanism of the Lithium Ion Battery During Nail Penetration

Experimental and numerical study on penetration-induced internal short-circuit of lithium-ion cell

Study on thermal runaway mechanism of 1000 mAh lithium ion pouch cell during nail penetration

Experimental and simulated study of thermal runaway characteristics of 16Ah nickel-cobalt-manganese (523) square soft-pack lithium-ion battery

Experimental Study on the Thermal Runaway and Its Propagation of a Lithium-Ion Traction Battery with NCM Cathode under Thermal Abuse

Characterization of Penetration Induced Thermal Runaway Propagation Process Within a Large Format Lithium Ion Battery Module

Research on the thermal runaway characteristics and risks of square soft lithium‐ion batteries nail penetration

Experiments and Modeling of Nail Penetration Thermal Runaway in a NCM Li-ion Power Battery

Comprehensive analysis of thermal runaway and rupture of lithium-ion batteries under mechanical abuse conditions

Thermal runaway propagation behavior and energy flow distribution analysis of 280 Ah LiFePO4 battery

Study on Thermal Runaway Behavior of Li-Ion Batteries Using Different Abuse Methods

Multi-layer Internal Short-Circuit Mechanism and Thermal Runaway Risk Assessment of Lithium-Ion Batteries Using Nail Penetration Simulation

Study on Thermal Runaway Propagation Characteristics of Lithium Iron Phosphate Battery Pack under Different SOCs

The Critical Characteristics and Transition Process of Lithium-Ion Battery Thermal Runaway

Thermal Runaway Propagation and Combustion Characteristics of Enclosed LiNi0.8Co0.1Mn0.1O2 Pouch Battery Modules in an Open Environment

Thermal Runaway Modeling of LiNi0.6Mn0.2Co0.2O2/graphite Batteries under Different States of Charge

Heating position effect on internal thermal runaway propagation in large-format lithium iron phosphate battery

The Hazards Analysis of Nickel-Rich Lithium-Ion Battery Thermal Runaway under Different States of Charge