Abstract:Herein, an effective electrochemical activation strategy is designed to enhance the overall energy storage performance of copper-based (Cu-based) nickel–cobalt hydroxide (NiCo–OH). The long-term cyclic voltammetry (CV) cycling process in an alkaline electrolyte triggered the in situ transformation from Cu-doped NiCo–OH (Cu/NiCo–OH) to electrochemically activated CuO-doped NiCo–OH (EA-CuO/NiCo–OH) on a porous Cu foam (CF) substrate, together with the significantly increased charge storage capacity. Benefiting from fast electron/ion transfer, abundant surface defects, and powerful synergistic effect contributed by the unique self-supported heterostructure, the EA-CuO/NiCo–OH electrode can achieve a high areal capacity of 4.186 C cm–2 under 5 mA cm–2, with excellent rate performance (67.5% of initial capacity under 50 mA cm–2) and long life span (84.8% of initial capacity after 5000 cycles). The as-fabricated EA-CuO/NiCo–OH//AC hybrid supercapacitor device shows a maximum energy density of 0.648 mW h cm–2 and an outstanding cycling stability (93.4% of initial capacity after 8000 cycles). The superior energy storage performance underpins the high potential of the reported electrochemical activation strategy for developing advanced Cu-based and bimetallic hydroxide-derived electrode materials.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01662.Experimental section; contact angle measurements of the CF and Cu(OH)2 electrodes; CV curves of CF, Cu(OH)2, Cu/Ni–OH, and Cu/Co–OH after different cycles; XRD patterns and SEM images of NiCo–OH, Ni–OH, and Co–OH powders; absolute values of charges stored on the Ni–OH, Co–OH, and NiCo–OH electrodes after different cycles; CV curves of NiCo–OH, Ni–OH, and Co–OH after different cycles; SEM images of CF, Cu(OH)2, Cu/NiCo–OH, Cu/Ni–OH, and Cu/Co–OH after different CV cycles; EDX spectra of Cu/NiCo–OH and EA-CuO/NiCo–OH; XPS surface atomic ratio variation of Cu/NiCo–OH after different cycles; XRD patterns of CF, Cu(OH)2, EA-CuO (CF), EA-CuO (Cu(OH)2), NiCo–OH powder, and Cu/NiCo–OH scraped from the CF substrate; survey scan XPS spectra of Cu/NiCo–OH and EA-CuO/NiCo–OH; ex situ Cu 2p3/2 XPS spectra of Cu/NiCo–OH after different CV cycles; Cu LM2 spectra of Cu/NiCo–OH and EA-CuO/NiCo–OH; ex situ Ni 2p and Co 2p XPS spectra of Cu/NiCo–OH after different CV cycles; comparison of CV curves for the EA-CuO (CF), EA-CuO (Cu(OH)2), EA-CuO/Co–OH, EA-CuO/Ni–OH, and EA-CuO/NiCo–OH electrodes; CV and GCD curves of the EA-CuO (CF), EA-CuO (Cu(OH)2), EA-CuO/Ni–OH, and EA-CuO/Co–OH electrodes; survey scan, Cu 2p, Ni 2p, and Co 2p XPS spectra of the EA-CuO/NiCo–OH electrode before and after the cycling test; comparison of CV curves for the EA-CuO/NiCo–OH and AC electrodes; CV curves, GCD curves, and rate performance of the AC electrode; equivalent circuit parameters of the Cu/NiCo–OH electrode after different cycles; comparison of areal capacities for various electrodes in a three-electrode configuration; and comparison of energy density (E) versus power density (P) for different devices (PDF)This article has not yet been cited by other publications.

Study of double perovskite La2B(II)MnO6 (B: Ni, Co, Cu) as electrode materials for energy storage

Synthesis, magnetic properties, and electrochemical evaluation of La2NiMnO6 double perovskite as electrode materials for supercapacitor applications

Effect of charge-discharge with higher capacitance performance of Ni-substituted CoFe 2 O 4 magnetic nanoparticles for energy storage

NiO/MnO2coated on carbon felt as an electrode material for supercapacitor applications

NiO/MnO 2 coated on carbon felt as an electrode material for supercapacitor applications

3D Hierarchical Urchin-Like Ni 0.3 Co 0.6 Cu 0.1 (CO 3 ) 0.5 (OH) Microspheres for Supercapacitors with High Specific Capacitance

Fabrication of Mn doped BiFeO3 as an electrode material for supercapacitor applications

Nickel-Copper Bimetallic Oxide Nanoparticles Prepared by Simple Coprecipitation Method as High Performance Electrode Materials for Asymmetric Supercapacitors

Manganese cobalt oxide nanoflakes for electrochemical energy storage

Co3V2O8 hollow spheres with mesoporous walls as high-capacitance electrode for hybrid supercapacitor device

Delocalizing the d-electrons spin states of Mn site in MnO2 for anion-intercalation energy storage

High-performance strontium and bismuth bimetallic oxides electrode:combine first-principles calculations with electrochemical tests

Investigation of the Electrochemical Performance of Manganese Based Layered Double Hydroxides for Energy Storage Applications

Effect of A-Site Substitution on LaMnO3 Perovskite via Sr Ions for Energy Applications

A novel double perovskite Dy2CoMnO6 as supercapacitor electrode with efficient electrochemical performance

Double perovskite La2CoMnO6 hollow spheres prepared by template impregnation for high-performance supercapacitors

Synthesis and capacitance performances of Ni–Mn-Oxides as electrode materials for high-performance supercapacitors

MnNbS/polyaniline composite‐based electrode material for high‐performance energy storage hybrid supercapacitor device

B-Site Cation-Ordered Double-Perovskite Oxide As an Outstanding Electrode Material for Supercapacitive Energy Storage Based on the Anion Intercalation Mechanism.

In Situ Growth and Electrochemical Activation of Copper-Based Nickel–Cobalt Hydroxide for High-Performance Energy Storage Devices

Highly-active CoMn2O4 nanowires decorated with multilayer Ni(OH)2 nanosheets as bind-free electrodes for high-performance energy storage application