In Situ Growth and Electrochemical Activation of Copper-Based Nickel–Cobalt Hydroxide for High-Performance Energy Storage Devices

Guichao Liu,Xue-Zhi Song,Yuechi Hao,Zhifang Feng,Ruiyuan Hu,Xiaofeng Wang,Yu-Lan Meng,Zhenquan Tan
DOI: https://doi.org/10.1021/acsaem.1c01662
IF: 6.4
2021-09-14
ACS Applied Energy Materials
Abstract:Herein, an effective electrochemical activation strategy is designed to enhance the overall energy storage performance of copper-based (Cu-based) nickel–cobalt hydroxide (NiCo–OH). The long-term cyclic voltammetry (CV) cycling process in an alkaline electrolyte triggered the in situ transformation from Cu-doped NiCo–OH (Cu/NiCo–OH) to electrochemically activated CuO-doped NiCo–OH (EA-CuO/NiCo–OH) on a porous Cu foam (CF) substrate, together with the significantly increased charge storage capacity. Benefiting from fast electron/ion transfer, abundant surface defects, and powerful synergistic effect contributed by the unique self-supported heterostructure, the EA-CuO/NiCo–OH electrode can achieve a high areal capacity of 4.186 C cm–2 under 5 mA cm–2, with excellent rate performance (67.5% of initial capacity under 50 mA cm–2) and long life span (84.8% of initial capacity after 5000 cycles). The as-fabricated EA-CuO/NiCo–OH//AC hybrid supercapacitor device shows a maximum energy density of 0.648 mW h cm–2 and an outstanding cycling stability (93.4% of initial capacity after 8000 cycles). The superior energy storage performance underpins the high potential of the reported electrochemical activation strategy for developing advanced Cu-based and bimetallic hydroxide-derived electrode materials.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01662.Experimental section; contact angle measurements of the CF and Cu(OH)2 electrodes; CV curves of CF, Cu(OH)2, Cu/Ni–OH, and Cu/Co–OH after different cycles; XRD patterns and SEM images of NiCo–OH, Ni–OH, and Co–OH powders; absolute values of charges stored on the Ni–OH, Co–OH, and NiCo–OH electrodes after different cycles; CV curves of NiCo–OH, Ni–OH, and Co–OH after different cycles; SEM images of CF, Cu(OH)2, Cu/NiCo–OH, Cu/Ni–OH, and Cu/Co–OH after different CV cycles; EDX spectra of Cu/NiCo–OH and EA-CuO/NiCo–OH; XPS surface atomic ratio variation of Cu/NiCo–OH after different cycles; XRD patterns of CF, Cu(OH)2, EA-CuO (CF), EA-CuO (Cu(OH)2), NiCo–OH powder, and Cu/NiCo–OH scraped from the CF substrate; survey scan XPS spectra of Cu/NiCo–OH and EA-CuO/NiCo–OH; ex situ Cu 2p3/2 XPS spectra of Cu/NiCo–OH after different CV cycles; Cu LM2 spectra of Cu/NiCo–OH and EA-CuO/NiCo–OH; ex situ Ni 2p and Co 2p XPS spectra of Cu/NiCo–OH after different CV cycles; comparison of CV curves for the EA-CuO (CF), EA-CuO (Cu(OH)2), EA-CuO/Co–OH, EA-CuO/Ni–OH, and EA-CuO/NiCo–OH electrodes; CV and GCD curves of the EA-CuO (CF), EA-CuO (Cu(OH)2), EA-CuO/Ni–OH, and EA-CuO/Co–OH electrodes; survey scan, Cu 2p, Ni 2p, and Co 2p XPS spectra of the EA-CuO/NiCo–OH electrode before and after the cycling test; comparison of CV curves for the EA-CuO/NiCo–OH and AC electrodes; CV curves, GCD curves, and rate performance of the AC electrode; equivalent circuit parameters of the Cu/NiCo–OH electrode after different cycles; comparison of areal capacities for various electrodes in a three-electrode configuration; and comparison of energy density (E) versus power density (P) for different devices (PDF)This article has not yet been cited by other publications.
materials science, multidisciplinary,chemistry, physical,energy & fuels
What problem does this paper attempt to address?