Abstract:The inorganic powder slurry extrusion printing technique known as robocasting is an interesting method to fabricate complex porous architectures whereby feedstocks containing organic binders and powders are printed and the resulting scaffolds are subjected to sintering. A major limiting factor of this technique is the simultaneous tailoring of vascularization efficacy and osteogenic activity, usually done by adding the secondary phase in the organic slurry before the writing step. Mechanical mixing of biphasic powders is required to avoid compromising the biological performance and physical defects caused by significantly different physicochemical properties. This study addresses this issue by developing a selective ion doping and microstructure tuning for the production of bioceramic scaffolds with a binozzle robocasting process. Different metal ions (Sr2+, Mg2+) were doped into wollastonite (CaSiO3; CSi) powders considering the mechanical stability and bioactive enhancement of the bioceramic scaffolds. Subsequently, the Mg-doped CSi slurries were used as shell-nozzle feedstocks added with 5, 10, and 15 μm diameter polystyrene microbeads that allowed shell-layer micropore production in pore struts during sintering. Finally, the most promising pore-strut microstructures and mechanical evolution of scaffolds were evaluated, and especially the enhanced fibrovascularization potential was confirmed in dorsal muscle embedding model in rabbits. This study may open an avenue to designing multiproperty-tuned macro- and microporous bioceramics for bone regenerative medicine, especially in challenging bone defect conditions.

Fabrication of porous (Ba,Sr)(Co,Fe)O3-δ (BSCF) ceramics using gelatinization and retrogradation phenomena of starch as pore-forming agent

Effect of Foreign Ion Substitution and Micropore Tuning in Robocasting Single-Phase Bioceramic Scaffolds on the Physicochemical Property and Vascularization

Porous sodium borate-bonded SiC ceramics

Porous Silicon Nitride Ceramics Prepared by Extrusion Using Starch as Binder

Fabrication And Properties Of Porous Si3n4-Sio2 Ceramics With Dense Surface And Gradient Pore Distribution

Synthesis and Characterization of Ba0.5Sr0.5Co0.8Fe0.2O3−σ

Effect of Starch on Sintering Behavior for Fabricating Porous Cordierite Ceramic

Fabrication, Structure and Properties of Porous SiC Ceramics with High Porosity and High Strength

Low - Temperature Sintering of Porous Ceramics via Sodium Borate Addition

Highly Porous Silicon-Based Ceramics Fabricated with Restrained Sintering by Reaction Bonding (Rsrb)

Direct Ink Writing Core-Shell Wollastonite@Diopside Scaffolds with Tailorable Shell Micropores Favorable for Optimizing Physicochemical and Biodegradation Properties

Dense-porous multilayer ceramics by green shaping and salt leaching

Porous Alumina-Bentonite Ceramics: Effects of Fillers and Molding Technique

Effects of Pore Morphology on the Fabrication and Mechanical Properties of Porous Si<sub>3</sub>N<sub>4</sub> Ceramics

Preparation and Characterization of Porous La0.6Sr0.4Co0.2Fe0.8O3- Ceramics

Fabrication and Characterization of Hierarchical Porous SiC Ceramics Via Gelcasting and Carbothermal Reduction Between Carbon and SiO

Effects of Pore Morphology on the Fabrication and Mechanical Properties of Porous Si3N4 Ceramics

Preparation of Boron Carbide Porous Ceramic by Gel-casting

Fabrication and Properties of SiC Porous Ceramics by Slip Casting Process

Processing, Microstructures and Mechanical Properties of Aqueous Gelcasted and Solid-State-Sintered Porous Sic Ceramics