Abstract:The amino substituted 1,4-naphthoquinone photosensitizers, viz; BrA5; 2-bromo-3-(pentylamino)naphthalene-1,4-dione, BrA6; 2-bromo-3-(hexylamino)naphthalene-1,4-dione, BrA7; 2-bromo-3-(heptylamino)naphthalene-1,4-dione, BrA8; 2-bromo-3-(octylamino)naphthalene-1,4-dione, have been synthesized from 2,3-dibromonaphthalene-1,4-dione. These photosensitizers were employed for the first time in TiO 2 NG-based dye-sensitized solar cells (DSSCs). The TiO 2 nanograin (TiO 2 NG) compact layer was prepared using chemical bath deposition to reduce the electron recombination. The porous layer of TiO 2 NG was deposited using the doctor blade method, followed by calcination at 450 °C. After sensitization of BrA5, BrA6, BrA7, and BrA8 photosensitizers on the TiO 2 NG photoelectrodes, the optical properties of photoelectrodes show the broad band each in the visible region, which is assigned to n → π* charge-transfer transition. FT-IR analysis of photosensitizers showed the existence of N–H bands. The XRD pattern of TiO 2 NG photoanode confirmed the anatase and rutile phase. The E 0-0 and HOMO–LUMO energy levels were calculated using UV–visible, fluorescence spectroscopy, and cyclic voltammetry, respectively. The E 0-0 of BrA5 and BrA7 is 2.35 eV, while that of BrA6 and BrA8 is 2.33 eV. The DSSCs system is fabricated by loading the BrA5, BrA6, BrA7, and BrA8 photosensitizers on TiO 2 NGs. The photosensitizer's photovoltaic performances of TiO 2 NG-based electrodes were studied through electrochemical impedance analysis. The J–V curve analysis and characterization show that the efficient light absorption and reduction of charge recombination at the TiO 2 NG photoanodes are the main reasons for the efficiency of the TiO 2 NG/BrA5, TiO 2 NG/BrA6, TiO 2 NG/BrA7, and TiO 2 NG/BrA8 photoelectrodes. Compared to DSSCs employing other photosensitizers (BrA5, BrA6, and BrA7) on a TiO 2 NG photoelectrode (TiO 2 NG/BrA5 (0.33%), TiO 2 NG/BrA6 (0.35%), TiO 2 NG/BrA7 (0.36%), those using BrA8 demonstrate higher power conversion efficiencies. Specifically, TiO 2 NG/BrA8 shows the highest efficiency at 0.43%. The enhanced performance of the TiO 2 NG/BrA8-based DSSC can be attributed to its increased dye loading and rapid electron injection. The present study will open a new route to fabricate highly efficient DSSCs using amino-substituted 1,4-naphthoquinone photosensitizers.

Optical and electrical properties of organic dye sensitized Cr–ZnO and Ni–CdO nanoparticles

Suitability of N-propanoic Acid Spiropyrans and Spirooxazines for Use As Sensitizing Dyes in Dye-Sensitized Solar Cells

Performances of dye-sensitized solar cell based on ZnO photoanode sensitized with cadmium complexes Cd(phen)2(NO3)(NO2)

Enhance the performance of dye-sensitized solar cells by co-sensitization of 2,6-bis(iminoalkyl)pyridine and N719

Photochemical synthesized NiO nanoparticles based dye-sensitized solar cells: a comparative study on the counter lectrodes and dye-sensitized concentrations

Synthesis of zinc oxide and tin oxide (ZnO/SnO2) nanocomposite for photoanode applications in dye sensitized solar cell

Optoelectronic of Properties of N1-[4-(Diethylamino)phenyl]-N4,N4-diethyl-N1-(thiophen-2-yl)benzene-1,4-diamine-Based (D-A2-π-A) Dyes with Enzothiadiazole/Dihydrothieno[3,4-b][1,4]dioxine as Auxiliary Acceptor for DSSCs Applications: DFT/TD-DFT Approach

Erbium-doped ZnO nanoparticles for anode materials: A comparative study using anthocyanin and curcumin dyes in DSSC

Enhanced photo-sensing activity of in-doped ZnO nanoparticles synthesized by wet chemical method

Selected organic dyes (carminic acid, pyrocatechol violet and dithizone) sensitized metal (silver, neodymium) doped TiO2/ZnO nanostructured materials: A photoanode for hybrid bulk heterojunction solar cells

Fabrication of an efficient amino substituted 1,4-naphthoquinones sensitized TiO2 nanograin based dye sensitized solar cells

Nanostructured SnO2 Photoanode-Based Dye-Sensitized Solar Cells

Photoelectrochemical studies on the SnO2 nanostructured porous film sensitized by cyanine dye

Fabrication of dye-sensitized solar cells with ZnO nanorods as photoanode and natural dye extract as sensitizer

Precipitation-assisted, low-temperature-annealed TiO2 and its nanocomposites-based photoanode for DSSCs

Synthesis, structural and optical properties of Ag doped ZnO nanoparticles with enhanced photocatalytic properties by photo degradation of organic dyes

Nb2O5 porous nanotubes: potential approach as photoanode material for dye-sensitized solar cells

Electrochemical synthesis of a double‐layer film of ZnO nanosheets/nanoparticles and its application for dye‐sensitized solar cells

Preparation and Enhanced Properties of Dye-Sensitized Solar Cells by Surface Plasmon Resonance of Ag Nanoparticles in Nanocomposite Photoanode

Application of Chlorophyll as Sensitizer for ZnS Photoanode in a Dye-Sensitized Solar Cell (DSSC)

High Efficient Cyanine Dyes Used for Nanocrystalline Tio(2)Electrode Sensitization