Abstract:Abstract Warm mix asphalt (WMA) was developed to reduce asphalt production temperatures and energy consumption. Production of toxic gas emissions can be reduced considerably. However, lowered production temperature results in the presence of trapped moisture in the aggregates that could lead to stripping and subsequently moisture susceptibility problems, and which can be mitigated by using additives. Asphalt mixtures incorporating such additive must exhibit at least similar performance to conventional hot mix asphalts (HMA) which produce at higher temperatures. This paper evaluates the engineering properties and moisture susceptibility of asphalt mixtures incorporating Organo-Silane additive for use as WMA and anti-stripping agent. WMA samples were compacted at 125 °C and 115 °C and their performance were compared with control HMA specimens. The asphalt mixtures were prepared using similar aggregate gradation and binder types. Mixture workability was quantified in terms of the Compaction Energy Index (CEI) that was measured by integrating the area under the densification curve between gyration 8 and 92% theoretical maximum density. Lower CEI implies a more workable mixture. The CEI of WMA was 76.4, which was much less than the corresponding value for HMA. Samples were also tested for Marshal stability, resilient modulus and wheel tracking (WTT) tests according to ASTM D6927, ASTM D4123 and BS EN12697-22 procedures, respectively. The control samples perform better in the stability test. The resilient modulus of WMA was only about 10% lower compared to HMA. Resistance to permanent deformation was measured from the dynamic stability (DS) or the number of wheel passes per 1 mm rut depth over the last 15 minutes in a 60-minute tracking test. The DS of HMA, WMA compacted at 125 °C and 115 °C were 3138, 3044 and 2837, respectively. From the rutting resistance standpoint, the results are not significantly different. Hence, incorporation of the additive does not adversely affect mixture rutting resistance despite the lowered production temperature.

Preparation and properties of silane coupling agent modified zeolite as warm mix additive

Effect of silane coupling agent modified zeolite warm mix additives on properties of asphalt

Compacting Properties of Zeolite Based Warm Asphalt Mixture

The Effect of a Zeolite Addition to Modified Bitumen on the Properties of Stone Matrix Asphalt Lärmarmer Mixtures Produced as Warm Mix Asphalt

Application of NaP1 Zeolite Modified with Silanes in Bitumen Foaming Process

Effects of silane coupling agent modified coal waste powder on performance of asphalt mortar and asphalt mixture

Study on Performance of Silica Modified Asphalt and Its Mixture

Research on Preparation and High Temperature Behavior of High-Modulus Asphalt

Surface Modification of Multiwalled Carbon Nanotube on the Performance of SBS Asphalt

Laboratory investigation on warm mix asphalt incorporating organo-silane additive

Modification Mechanism and Rheological Properties of Emulsified Asphalt Evaporative Residues Reinforced by Coupling-Modified Fiber

Void Distribution in Zeolite Warm Mix Asphalt Mixture Based on X-ray Computed Tomography

Coupled effects of Crumb Rubber and zeolite on the performance of dense-graded asphalt mixture: a study using a balanced mix design approach

Effect of Silane Coupling Agent on Improving Adhesive Property between Acidic Aggregate and Hydraulic Asphalt

Using Silane Coupling Agent Coating on Acidic Aggregate Surfaces to Enhance the Adhesion between Asphalt and Aggregate: A Molecular Dynamics Simulation

Research on the Mechanism of Surfactant Warm Mix Asphalt Additive-Based on Molecular Dynamics Simulation

Silane coupling agent impact on surface features of modification of basalt fibers and the rheological properties of basalt fiber reinforced asphalt

Comparative study of typical asphalt binders in Xinjiang region modified with warm mix additives

Investigation of rheological properties and modification mechanism of SBS-modified asphalt with different warm mix additives

Low-density polyethylene/silica compound modified asphalts with high-temperature storage stability

Moisture susceptibility of chemically treated quartzite aggregates in hot mix asphalt