Abstract:Abstract Warm mix asphalt (WMA) was developed to reduce asphalt production temperatures and energy consumption. Production of toxic gas emissions can be reduced considerably. However, lowered production temperature results in the presence of trapped moisture in the aggregates that could lead to stripping and subsequently moisture susceptibility problems, and which can be mitigated by using additives. Asphalt mixtures incorporating such additive must exhibit at least similar performance to conventional hot mix asphalts (HMA) which produce at higher temperatures. This paper evaluates the engineering properties and moisture susceptibility of asphalt mixtures incorporating Organo-Silane additive for use as WMA and anti-stripping agent. WMA samples were compacted at 125 °C and 115 °C and their performance were compared with control HMA specimens. The asphalt mixtures were prepared using similar aggregate gradation and binder types. Mixture workability was quantified in terms of the Compaction Energy Index (CEI) that was measured by integrating the area under the densification curve between gyration 8 and 92% theoretical maximum density. Lower CEI implies a more workable mixture. The CEI of WMA was 76.4, which was much less than the corresponding value for HMA. Samples were also tested for Marshal stability, resilient modulus and wheel tracking (WTT) tests according to ASTM D6927, ASTM D4123 and BS EN12697-22 procedures, respectively. The control samples perform better in the stability test. The resilient modulus of WMA was only about 10% lower compared to HMA. Resistance to permanent deformation was measured from the dynamic stability (DS) or the number of wheel passes per 1 mm rut depth over the last 15 minutes in a 60-minute tracking test. The DS of HMA, WMA compacted at 125 °C and 115 °C were 3138, 3044 and 2837, respectively. From the rutting resistance standpoint, the results are not significantly different. Hence, incorporation of the additive does not adversely affect mixture rutting resistance despite the lowered production temperature.

Evaluation of warm mix effect in laboratory using a self-developed WMA additive Alube

Quantitative Evaluation on the Energy Saving and Emission Reduction Characteristics of Warm Mix Asphalt Mixtures

Effects of Asphalt Binder Type on Mixing Flowability and Workability Index of Asphalt Mixtures

Mechanical Performance Of Warm-Mixed Porous Asphalt Mixture With Steel Slag And Crumb-Rubber-Sbs Modified Bitumen For Seasonal Frozen Regions

Investigation of rheological properties and modification mechanism of SBS-modified asphalt with different warm mix additives

Experimental Study on Pavement Performances of SBP Modified Asphalt

Laboratory investigation on warm mix asphalt incorporating organo-silane additive

Effect of Organic Viscosity-Reducing Warm-Mix Agent on the Performance of Rubber Asphalt

Evaluation of cooling effect and road performance of warm mixed high viscosity porous asphalt mixture

Gradation Design and Parameter Determination of Warm-Mix-Agent-Modified Asphalt Mixture

Rheological Properties of High-Viscosity Modified Asphalt Containing Warm-Mix Additives

Characteristics, mechanisms, and environmental LCA of WMA containing sasobit: An analysis perspective combing viscosity-temperature regression and interface bonding strength

Research on the Mechanism of Surfactant Warm Mix Asphalt Additive-Based on Molecular Dynamics Simulation

Research on Preparation and High Temperature Behavior of High-Modulus Asphalt

Comparative study of typical asphalt binders in Xinjiang region modified with warm mix additives

Comprehensive rheological and mechanistic evaluation of an asphalt binder and mixture modified with warm mix additives

Laboratory investigation on the properties of warm mixing-recycled asphalt containing waste oil and plastics

Use of Multi-Scale Investigation to Evaluate Adhesion Performance of Warm-Mix Polymer-Modified Asphalt

Laboratory Evaluation of Warm-Mix Epoxy SBS Modified Asphalt Binders Containing Sasobit

Preparation of Wax-Based Warm Mixture Additives from Waste Polypropylene (PP) Plastic and Their Effects on the Properties of Modified Asphalt

Towards the low-energy usage of high viscosity asphalt in porous asphalt pavements: A case study of warm-mix asphalt additives