Abstract:In the present study, the new composite based on MnCoFe-LDH nanoflower/Ni-MOF/ hollow fiber membrane (HFM) was synthesized in such a way that first MnCoFe-LDH and Ni-MOF nanoparticles were synthesized separately, then converted into a composite and finally coated on the surface of the HFM. The final composite was characterized using FT-IR, XRD, SEM, and EDX analysis and applied as a promising and effective sorbent for the solid-phase microextraction of amaranth dye (as a model analyte) in various water and food samples, followed by spectrophotometric analysis. It should be noted that two main driving forces for conducting the extraction process are the electrostatic and π-π interactions between the surface of the adsorbent and the analyte molecule. By using this proposed adsorbent, the requirement for using a centrifuge for phase separation was eliminated. Furthermore, there was no necessity to use the vortex or the stirrer to carry out the adsorption and desorption steps, and only by hand-shaking of the sample solution, high extraction recovery was achieved. These advantages made the extraction process greener, quicker, and easier. Optimizations of all parameters affecting the proposed method (such as pH, sample solution, HFM size, adsorption time, and desorption time) were done using the central composite design methodology. The findings indicate that the calibration graphs exhibited linearity in the range of 20.0–1000 μg/L, with the limit of detection of 5.6 μg/L, the limit of quantification of 17.2 μg/L, and the correlation coefficient of 0.9981 for the model analyte. Furthermore, the relative recovery was obtained in the range of 93.6–101 %. In addition, intra-day RSD, inter-day RSD, and preconcentration factor (PF) were achieved at 3.8, 6.9, and 30, respectively. The suggested sorbent was successfully synthesized and applied for effective solid-phase microextraction of amaranth dye in different real samples.

Hollow fiber supported liquid phase microextraction of Co(II), Fe(III) and Al(III) as their oxinate chelates from water and dried tea leaves followed by HPLC–UV analysis

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Ionic liquid-based hollow fiber liquid-phase microextraction for the determination of trace lead (II) in environmental water and tea drinks samples by graphite furnace atomic absorption spectrometry

Covalent Organic Framework-Lzu1@pei@fe3o4-based Magnetic Dispersive Micro-Solid Phase Extraction of Tetracyclines from Environmental Water Prior to HPLC Analysis.

Magnetic solid-phase extraction technique based on Fe3O4@coPPy-PTH nanocomposite for extraction of cobalt, chromium, and nickel prior to determination by microsample injection system-flame atomic absorption spectrometry in alcoholic and nonalcoholic beverages

Ultrasound Assisted Ferrofluid Dispersive Liquid Phase Microextraction Coupled with Flame Atomic Absorption Spectroscopy for the Determination of Cobalt in Environmental Samples

A green solventless temperature-assisted homogeneous liquid–liquid microextraction method based on 8-hydroxyquinoline simultaneously as complexing agent and extractant for preconcentration of cobalt and nickel from water and fruit juice samples

Simultaneous extraction of trace amounts of cobalt, nickel and copper ions using magnetic iron oxide nanoparticles without chelating agent

Development of a dispersive liquid–liquid microextraction procedure based on a natural deep eutectic solvent for ligand-less preconcentration and determination of heavy metals from water and food samples

Simple Magnetic Polymeric Ionic Liquid Nanocomposite Coated Hollow Fiber Membrane for the Determination of Lead (II) and Copper (II) in Water and Fruit Juice with Microinjection Sampling-Flame Atomic Absorption Spectrometry (MIS-FAAS)

Magnetic Luffa@metal-organic frameworks (MOF-199) nanocomposite for the solid phase microextraction of some metal ions at trace levels from food and water samples

Optimization and synthesis of a novel sorbent composite based on magnetic chitosan-amine-functionalized bimetallic MOF for the simultaneous dispersive solid-phase microextraction of four aflatoxins in real water, herbal distillate, and food samples

Hollow fiber-based liquid phase microextraction followed by analytical instrumental techniques for quantitative analysis of heavy metal ions and pharmaceuticals

MnCoFe-LDH/Ni-MOF nanocomposite-coated hollow fiber membrane for solid phase extraction of amaranth dye from water and food samples followed by spectrophotometric analysis

Magnetic Covalent Organic Frameworks Combined with HPLC for Determination of Alkylphenols

Hollow fiber liquid phase microextraction combined with electrothermal atomic absorption spectrometry for the speciation of arsenic (III) and arsenic (V) in fresh waters and human hair extracts

Deep Eutectic Solvent-Based Microextraction of Lead(II) Traces from Water and Aqueous Extracts before FAAS Measurements

Ultrasensitive fluorometric determination of aluminum using the CoFe 2 O 4 NPs/SDS/oxine system with the aid of ultrasound waves

Determination of copper and cobalt in different tea samples at trace levels by FAAS after preconcentration with a novel iron PAMAM-OH-encapsulated magnetic nanoparticle as SPE sorbent

Magnetic Solid-phase Extraction with Fe3O4/Molecularly Imprinted Polymers Modified by Deep Eutectic Solvents and Ionic Liquids for the Rapid Purification of Alkaloid Isomers (Theobromine and Theophylline) from Green Tea

Syringe-to-syringe-dispersive liquid–phase microextraction combined with flame atomic absorption spectrometry for pre-concentration and determination of cobalt with the aid of experimental design