Abstract:Due to unavoidable compliance in the drive trains of the individual links, all industrial robots exhibit some elasticity in their respective joints. This elasticity causes a discrepancy between the measured motor position and the actual link position of the robot. For highly dynamic movements of the robot, or in the case of heavy payloads, this can lead to significant deviations between the desired and actual end-effector pose of the robot. One approach to mitigate the resulting task performance degradation is using suitable state estimation strategies for elastic-joint robots. While critical for task performance, the link positions are typically not separately measured for industrial robots. Instead, standard robot control systems rely on the measured motor positions. To this end, this work studies the state estimation problem of elastic-joint industrial robots and compares the performance of different observers. The comparison is performed on an industrial robot with six degrees of freedom (6-DOF) using a laser tracker measurement of the end-effector movement as a ground truth. Four observer concepts are state-of-the-art strategies from the literature, which are briefly summarized first. Subsequently, two novel estimation strategies are proposed. The first exploits encoder and angular velocity measurements, and the second is an estimator that combines encoder, acceleration, and angular velocity measurements. To the best of the authors' knowledge, this is the first work that compares the performance of real-time observers for elastic-joints industrial robots with 6-DOF in an experimental setup. The properties of all observers are discussed in terms of estimation accuracy, sensor configuration, computational complexity, and required knowledge of model parameters. The experiments show that the novel estimation strategies improve the position estimation accuracy of the end-effector by up to 72 %.

Minimum-Variance Load-Side External Torque Estimation Robust Against Modeling and Measurement Errors

Sensorless Control Of Permanent Magnet Synchronous Motors With Compensation For Parameter Uncertainty

Sensorless IPMSM Control Based on an Extended Nonlinear Observer with Rotational Inertia Adjustment and Equivalent Flux Error Compensation

Sensorless interior permanent magnet synchronous motor control with rotational inertia adjustment

Robust Load-Torque Estimation for DC Motor without Torque Sensor

Sensorless Control of Synchronous Motor Drives: Accurate Torque Estimation and Control Under Parameter Errors

Application of non-linear observers to on-line estimation of indicated torque in automotive engines

Load Torque Observer of Permanent Magnet Synchronous Motor

Nonlinear Flux Observer for Sensorless Control of IPMSM Based on a Novel Regression Model

Load torque observation and compensation for permanent magnet synchronous motor based on sliding mode observer

Torque Estimation for Robotic Joint with Harmonic Reducer Based on Deformation Calibration

MOB-Net: Limb-modularized Uncertainty Torque Learning of Humanoids for Sensorless External Torque Estimation

An Algorithm for Online Inertia Identification and Load Torque Observation Via Adaptive Kalman Observer-Recursive Least Squares

A Hybrid Data-driven Soft Sensor Framework for Torque Estimation

Robustness Improvement of Speed Estimation in Speed-Sensorless Induction Motor Drives

Design and Calibration of a Torque Sensor Based on Sectional Redundant Measurements.

Joint torque estimation method of industrial robot by combining error compensation model based on LSTM and iterative weighted parameter identification

Real-time observer designs for elastic-joint industrial robots: Experimental comparison and new strategies

Sensorless Collision Detection for Robots Based on Load Torque Observer

Model-free Friction Observers for Flexible Joint Robots with Torque Measurements

External Force Estimation Method for Robotic Manipulator Based on Double Encoders of Joints