Abstract:Lithium sources are of great significance for developing the next generation of lithium ion batteries. Most of the world’s lithium sources are found in salt lake brines. The main challenge of lithium extraction from salt lake brine is the separation of lithium ions from other coexisting ions, especially the separation of Li + and Mg 2+ . However, the traditional precipitation method for salt lake lithium extraction is cumbersome. In this project, a new electrolytic device with a solid-state electrolyte was developed for high-efficient lithium extraction from salt lake brines. Li 1+x Al x Ti 2−x (PO 4 ) 3 (LATP) is a promising NASICON-type solid-state electrolyte, which exhibits high ionic conductivity ( >10 -4 S/cm) at room temperature. LATP can be used as a lithium ion conductor, that is only lithium ions can transfer through it, which is ideal for separating lithium ions from other ions in salt lake brines. In this project, high-quality LATP was fabricated at a low cost. An electrolytic device was developed for lithium extraction, in which LATP was used together with a sacrificial anode, molten salts, and an inert cathode. Salt lake brines need to be concentrated by solar and/or wind evaporation before lithium extraction. The electrolytic device was operated above the melting point of the concentrated brine water, at which LATP exhibits a higher ionic conductivity for fast lithium ion transfer. A tiny voltage was applied across the two electrodes to drive the electrochemical reaction. The composition of lithium sources before and after extraction was investigated by inductively coupled plasma-optical emission spectroscopy (ICP-OES). Results show that lithium sources with a higher purity level were successfully extracted with high efficiency. Impurity ions were almost completely blocked by LATP.

High-purity electrolytic lithium obtained from low-purity sources using solid electrolyte

Extraction Of LiCl From Low-Purity Chlorides Through Solid Electrolyte Towards High-Purity Li2CO3 Production

Preparation of high-quality lithium sulfide by reducing lithium sulfate with hydrogen: a green and cost-effective method

Re-evaluation of battery-grade lithium purity toward sustainable batteries

Extracting Lithium from Low Concentration Solutions for Direct Battery Cathode Production

High ion‐selectivity of garnet solid electrolyte enabling separation of metallic lithium

Solid-State Electrolyte for Lithium Extraction from Salt Lake Brines

A Green Method of Synthesizing Battery-Grade Lithium Sulfide: Hydrogen Reduction of Lithium Sulfate

A Low-Cost Liquid-Phase Method of Synthesizing High-Performance Li6PS5Cl Solid-Electrolyte

Sustainable Lithium‐Metal Battery Achieved by a Safe Electrolyte Based on Recyclable and Low‐Cost Molecular Sieve

Selective lithium recovery and integrated preparation of high-purity lithium hydroxide products from spent lithium-ion batteries

Enabling “lithium-free” manufacturing of pure lithium metal solid-state batteries through in situ plating

Simultaneous Purification and Perforation of Low-Grade Si Sources for Lithium-Ion Battery Anode.

Sustainable lithium extraction and magnesium hydroxide co-production from salt-lake brines

Method for producing highly-pure battery grade lithium carbonate by using lithium sulfate solution

Photovoltaic-driven dual-oxidation seawater electrolyzer for sustainable lithium recovery

Low-Cost and Scalable Synthesis of High-Purity Li 2 S for Sulfide Solid Electrolyte

Lithium Recovery from an Alumina Electrolysis Slag Leaching Solution with Strong Acidity: Separation of Lithium-Ion and Production of Battery Grade Lithium Carbonate

Self‐Oxidated Hybrid Conductive Network Enables Efficient Electrochemical Lithium Extraction Under High‐Altitude Environment

A Novel Ethanol-Mediated Synthesis of Superionic Halide Electrolytes for High-Voltage All-Solid-State Lithium-Metal Batteries.

Lithium anode stable in air for low-cost fabrication of a dendrite-free lithium battery