Abstract:Studying the mechanical properties of argillaceous rocks is of major interest in geoscience. For example, these rocks are important in engineering applications such as being suitable cap-rocks for the geological storage of carbon dioxide and potential host rocks for the storage of nuclear waste. Furthermore, argillaceous rocks are encountered in different natural settings such as accretionary wedges or fault zones. As a result of their sedimentary and diagenetic history clay rich rocks are often characterised by multiscale textural anisotropy and compositional heterogeneity resulting in anisotropic mechanical and hydraulic properties. Here, we studied the anisotropic deformation behaviour of Opalinus Clay, collected from the Mont Terri underground laboratory, which is the envisaged host rock formation for nuclear waste disposal in Switzerland. We used the sandy facies of Opalinus Clay, characterized by an irregular wavy lamination of quartz-rich and carbonate-cemented lenses with clay-rich interlayers. Unconsolidated-cylindrical samples cored at 0&#176;, 45&#176; and 90&#176; to the macroscopically visible bedding were deformed in undrained constant strain rate experiments using a Paterson-type deformation apparatus. For each orientation, tests were performed at dry conditions varying either confining pressure (in the range of 50 - 100 MPa), temperature (25 - 200 &#176;C) or strain rate (1*10-3 - 5*10-6 s-1) to study the influence of testing condition and sample orientation on the deformation behaviour. In addition, we deformed a set of back saturated samples at fixed conditions of 50 MPa, 100 &#176;C and 5*10-4 s-1 to investigate the effect of water content on the material strength. The results show semi-brittle deformation with low yield strength and strain weakening behaviour, in which strain is localized in sub-millimetre to millimetre-wide shear zones at all conditions. Increasing water content reduces, whereas increasing confining pressure increases the peak strength. Samples that were deformed parallel to bedding orientation exhibit the highest strength compared to samples with an orientation of 90&#176; and 45&#176; to bedding. Only for the latter orientations a weak correlation was found between temperature and failure behaviour. The variation of strain rate shows no clear influence for all orientations. Within this test series, there appears to be a potentially greater influence of the porosity on the peak strength for 45&#176; and 90&#176; oriented samples. Clay rich layers seem to have a strong influence on localization and formation of shear zones, in particular for samples oriented at 45&#176; and 90&#176; to bedding. This observation was confirmed by electron microscopy performed on broad ion beam polished surfaces of deformed sample material. Our experiments reveal that water content, sample orientation with respect to bedding and confining pressure are the most important factors influencing the peak strength of the sandy facies of Opalinus Clay, whereas compositional heterogeneity is responsible for the localization behaviour.

Experimental investigations on the temperature and strain-rate dependence of failure and friction criteria for a porous sandstone

Experimental and numerical investigations on the mechanical behavior of sandstone subjected to gas undrained triaxial compression

Experimental investigation and micromechanical modeling of the brittle-ductile transition behaviors in low-porosity sandstone

Nonlinear Mechanical and 3D Rupture Morphology of Saturated Porous Sandstone Under True Triaxial Stress

Digital reconstruction of reservoir sandstones to predict hydraulic and mechanical rock properties

Mechanical behavior and fracture characteristics of high-temperature sandstone under true triaxial loading conditions

Study on the influence of pore water pressure on shear mechanical properties and fracture surface morphology of sandstone

3D digital-image correlation insight into generalized relaxation behavior of sandstone under stress and pore pressure coupling

Experimental and Numerical Investigation of Permeability Evolution with Damage of Sandstone under Triaxial Compression

Dynamic Mohr–Coulomb and Hoek–Brown strength criteria of sandstone at high strain rates

Thermal-hydraulic-mechanical coupling mechanical behavior and acoustic emission characteristics of deep sandstone

Experimental study on the mechanical properties, acoustic emission characteristics, and permeability evolution of sandstone under triaxial hydromechanical coupling

Effect of Confining Pressure and Strain Rate on Mechanical Behaviors and Failure Characteristics of Sandstone Containing a Pre-existing Flaw

Study on the Evolution of Mechanical Properties and Acoustic Emission of Medium-Permeability Sandstone under Multi-Level Cyclic Loading Stress Paths

Study on Hydro-Mechanical Coupling Failure and Permeability Enhancement Mechanisms for Sandstone with T-Shaped Fractures

Experimental Deformation of Sandy Opalinus Clay at Elevated Temperature and Pressure Conditions

Experimental investigation on microstructure characteristics and deformation failure behaviors of sandstone after high temperature under Brazilian splitting

Study on dynamic fracture properties of sandstone under the effect of high-temperature using large-scale sample

Experimental investigation on the stress-dependent permeability of post-failure sandstone under loading–unloading conditions

Mechanical Responses of a Porous Red Sandstone to Quasi-Static Cyclic Loads Under Uniaxial Compression

Strength and energy exchange of deep sandstone under high hydraulic conditions