Abstract:The pre-peak microstructure evolution of the material is crucial in determining the strength and failure scheme of the material, but is not captured by the existing shear strength parameters models which focus on post-peak stage information. Novel concepts of pseudo-cohesion and pseudo-internal friction angle that account for both the pre-peak and post-peak stage information were proposed in this study, based on the experimentally observed response of the rock mechanics parameters to an external load (the maximum principal stress). These two parameters were analytically derived as functions of maximum principal strain, with coefficients to be determined (i.e., by applying the Mohr–Coulomb criterion with these parameters to experimental data). The dependence of pseudo-cohesion and pseudo-internal friction angle on the axial strain and confining pressure was investigated. The evolution of the strength parameters was found to relate to the propagation of micro-crack developed in the loading process, as revealed by PFC 2D simulations reproducing experiments. The results show that (1) analytical model characterizing the pseudo-cohesion and internal friction angle as the quadratic function of axial strain accurately reflects the mechanical response characteristics of the specimen; (2) before the residual stage, the pseudo-cohesion first increases and then decreases with increasing strain, while the pseudo-internal friction angle increases continuously; (3) for the sandstone specimens studied, the pseudo-cohesion at the peak stress increases by a gradually decreasing rate with increasing confining pressure, while the pseudo-internal friction angle at the peak stress decreases by a decreasing rate with the increasing confining pressure; (4) CPM well characterized the mechanical properties of rock under multiple confining pressures, as the total stress–strain curves and failure modes of numerical specimens reproduced the experimental results. The evolution of rock pseudo-shear strength parameters is closely related to the external load and the generation, propagation, and penetration process of rock cracks. The rock pseudo-shear strength parameters are gradually mobilized with the increasing load, and the propagating of cracks owing to the decrease of mobilizable maximum cohesion and the increase of mobilizable maximum internal friction angle.

Mechanical Responses of a Porous Red Sandstone to Quasi-Static Cyclic Loads Under Uniaxial Compression

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Micro-mechanical analysis of the effects of stress cycles on the dynamic and static mechanical properties of sandstone

Experimental and numerical investigations on the mechanical behavior of sandstone subjected to gas undrained triaxial compression

Mechanical Characteristics of Red Sandstone Subjected to Freeze–Thaw Cycles and Increasing Amplitude Cyclic Load

Effect of Unloading Rate on the Mechanical Behavior and Fracture Characteristics of Sandstones Under Complex Triaxial Stress Conditions

Mechanical Properties and Permeability Evolution of Red Sandstone Subjected to Hydro-mechanical Coupling: Experiment and Discrete Element Modelling

Influence of volume compression on the unloading deformation behavior of red sandstone under damage-controlled cyclic triaxial loading

Mechanical properties of porous weakly cemented rocks under alternating creep-fatigue action

Mechanical and Acoustic Response of Low-Permeability Sandstone under Multilevel Cyclic Loading-Unloading Stress Path

Nonlinear Mechanical and 3D Rupture Morphology of Saturated Porous Sandstone Under True Triaxial Stress

Effects of cyclic dynamic loading on the mechanical properties of intact rock samples under confining pressure conditions

Mechanical responses of freeze–thaw treated natural stone masonry subject to compressive variable amplitude fatigue loading: Insights from stiffness loss and constitutive characterization

Mechanical properties and energy evolution law of water bearing sandstone under cyclic loading

A novel obtaining method and mesoscopic mechanism of pseudo-shear strength parameter evolution of sandstone

Investigation of compressive and tensile behaviors for porous sandstone by a microstructure-based constitutive model

Study on the Evolution of Mechanical Properties and Acoustic Emission of Medium-Permeability Sandstone under Multi-Level Cyclic Loading Stress Paths

Dynamic Response and Energy Evolution of Sandstone Under Coupled Static–Dynamic Compression: Insights from Experimental Study into Deep Rock Engineering Applications

Mechanical Properties and DEM-Based Simulation of Double-Fractured Sandstone under Cyclic Loading and Unloading

Dynamic compressive characteristics of a green sandstone under coupled hydraulic-mechanical loading: experiments and theoretical modeling

Mechanical properties and failure characteristics of sandstone under ramp loading paths