Experimental investigation on microstructure characteristics and deformation failure behaviors of sandstone after high temperature under Brazilian splitting

DOI: https://doi.org/10.1007/s40948-022-00429-8

2022-07-01

Abstract:Investigating the thermal effect on the damage mechanisms of rocks and failure responses is an indispensable link for the exploitation of deep mineral and geothermal resources. The study proceeded from thermally induced microstructure and discussed the influence of high temperatures up to 1000 °C on the macroscopic performances of sandstone under Brazilian splitting load. The tensile failure process was revealed by a combination of acoustic emission (AE) and digital image correlation (DIC). The results suggest that, thermal treatment induces microscopic damage by accumulating crack density and deteriorating fracture morphology, and the fractal dimension of microcracks rises linearly with temperature. Meanwhile, high temperatures raise the porosity of sandstone and promote the size distribution transition to larger pores, where four temperature stages (namely, 25–400 °C, 400–600 °C, 600–800 °C and 800–1000 °C) consistent with physical and mechanical parameters are divided. Ranging from 25 to 400 °C, the tensile strength and deformation coefficient increased slightly by 7.38% and 5.45% respectively. Exceeding this critical temperature, physical and mechanical parameters experience three stages of slight, sharp and residual decline. Thermal damage makes great differences in fracture and deformation characteristics of sandstone. A potential tendency from brittleness to ductility occurs at 800–1000 °C from a microscopic perspective, and the splitting mode of sandstone transitions from being controlled by compression fracture initiating from loading ends to tensile failure induced by multi-point cracking.

energy & fuels,geosciences, multidisciplinary,engineering, geological