Abstract:With advantages of non-contact, high energy density and local heating, the laser jet solder ball bonding (SBB) technique provides a flexible packaging method for three dimensional (3D) package structure and temperature sensitive components. In previous works, the microstructure and reliability of solder joints fabricated by laser jet SBB were studied. In recent studies, the essential factors influencing the wettability of the molten solder on the bonding pad in flux-free laser jet SBB process were investigated deeply, and the results revealed that the thick oxidation layer of solder balls and the severe contamination of surface of Au bonding pads can lead to the poor wetting. Meanwhile, the corresponding mechanism of the poor wetting was also discussed and analyzed. However, some other important factors causing the reliability degradation even failure of solder joints are still unclear in the laser jet SBB process, for example, the burning failure of electronic components induced by the laser beam. Thus, how to prevent this type failure becomes a tough task for mass production. In this study, from the point of view of the laser characteristics, the essential factors leading to the burning failure have been clarified through microanalysis by using scanning electron microscopy (SEM) and optical microscope (OM). Firstly, the homogeneity of the laser beam was characterized by a laser pro filer. Then, in order to determine the correlation between the burning failure and the transporting characteristics of the laser beam, the different displacements of the nozzle along horizontal (x) and vertical (z) directions were preset, and the burning points in the electronic components were confirmed by using OM and SEM. In addition, the reflection of the laser beam caused by the near spherical solder ball was also studied. The results show that the energy distribution of the laser beam is inhomogeneous and some laser micro-beam has higher energy. Meanwhile, the reflection of the laser beam occurs very commonly in laser jet SBB process, not only the Au bonding pad, but also the solder ball can reflect the laser beam. When a reflecting laser micro-beam contacts to the weak interface of the electronic components with sufficient energy density, the burning failure of the component may appear easily.

Laser-based soldering of a high-resolution optical filter instrument for space applications

Laser welding of laser-structured copper connectors for battery applications and power electronics

Optimizing Interfaces in Laser-Brazed Ceramic-Stainless Steel Joints for Hydrothermal Sensors through Finite-Element Modeling

Mass Fabrication of Microholes in Aviation Kerosene Filters Using the Back-water-assisted Picosecond Laser Drilling Technique

Laser Soldering of Sn-based Solders with Different Melting Points

Optical and optomechanical design of the MERLIN laser optical bench

Laser-induced damage and contamination testing for the next generation of LIDAR space optics

Laser-Assisted Micro-Solder Bumping for Copper and Nickel-Gold Pad Finish

Eco-Friendly Lead-Free Solder Paste Printing via Laser-Induced Forward Transfer for the Assembly of Ultra-Fine Pitch Electronic Components

Interfacial Reactions and Mechanical Properties of Sn-58Bi Solder Joints with Ag Nanoparticles Prepared Using Ultra-Fast Laser Bonding

Laser Sintering by Spot and Linear Optics for Inkjet-Printed Thin-Film Conductive Silver Patterns with the Focus on Ink-Sets and Process Parameters

Taming Ultrafast Laser Filaments for Optimized Semiconductor–Metal Welding

Laser-Enabled Surface Treatment of Disposable Endoscope Lens with Superior Antifouling and Optical Properties

Automated fiber attachment for 980 nm pump modules

Nanospot soldering polystyrene nanoparticles with an optical fiber probe laser irradiating a metallic AFM probe based on the near-field enhancement effect.

Simplified High-Efficiency Soldering Method for the Fabrication of Devices on Empty Substrate Integrated Waveguides

Comprehensive Analysis and Application of Laser Bonding Technology for Glass-Based Integrated Sensors

Laser beam brazing of aluminum alloys in XHV-adequate atmosphere with surface deoxidation by ns-pulsed laser radiation

Recent Advences in Laser and Laser-Assisted Bonding (LAB) Technologies for Micro-Soldering and Applications to Mini-LED

The connection of glass and metal with a large gap by combining laser soldering and ultrafast laser welding

Reliability and Failure Analysis of Electronic Components Induced by the Reflection of Laser Beam in the Laser Jet Solder Ball Bonding Process