Abstract:One of the major problems in freeform illumination design in a geometrical optics approximation is picture generation with extended light sources. In contrast to the freeform design with zero-étendue sources, the extension of the light source leads to the typical blurring effect and a contrast reduction of the required irradiance. This effect can be minimized by increasing the distance between the freeform surface and the light source, which according to étendue conservation, results in an impractically large projection optic. To tackle this problem, we propose a design concept consisting of the combination of a pattern-generating double freeform surface for collimated beam shaping, which is calculated for a zero-étendue light source, and an imaging projection system with a telecentric object space. The design concept works independently of the shape of the emission area of the light source and does not require a representation of the extended light source by several individual wavefronts. By interpreting the pattern blurring effect as a composition of a shift contribution and a distortion contribution, we show that both can be minimized simultaneously by an appropriate placement of the object plane of the imaging optics and by making the distance between both freeform surfaces as small as possible. This allows the calculation of compact, energy-efficient freeform illumination systems for picture generation with real extended light sources. We demonstrate the significant blurring reduction by designing a simple illumination system consisting of a collimation optic, a (zero-étendue) double freeform lens for collimated beam shaping, and a projection lens for the generation of the target distribution "Elaine" with an extended Lambertian emitter of 3 mm×3 mm extension and ±42 deg maximum opening angle. For a working distance to the projection system of 500 mm and a target area of 300 mm×300 mm, a relative blurring extension of 2% is estimated, compared to 23% for a single freeform projector with the same energy throughput and similar lateral extension. The influence of the doublefreeform thickness on the blurring reduction is demonstrated, and a summary of the design procedure for the developed design concept is given.

Light pattern generation with hybrid refractive microoptics under Gaussian beam illumination

Design of Off-angle Beaming Device Based on Subwavelength Metal Thin Film Microstructure

Time-dependent Physical Response During Photorefractive Grating Formation at Large Modulation

Characterization of White-Light Non-Diffracting Beams Generated Using a Deformable Mirror.

Characterization of Dual-Periodic Structures with Optical Scattering

Generation of Accelerating Light Beams Based on Integrated Photonic Approaches

Nonlinear generalized source method for modeling second-harmonic generation in diffraction gratings

THz Beam Shaping Based on Diffractive Transformation for Forming Patterned Simulation Lightfields and Wavefronts

Demonstration of synergic Fresnel and Fraunhofer diffraction for application to micrograting fabrication

High fidelity generation of complex optical field through scattering medium with iterative wavefront optimization

Super-Oscillating Diffractive Optical Spot Generators

Magnification of Diffraction Patterns Using Plane Wave Illumination

Generation of needle-shaped beam with super-resolution spot and large depth of focus using diffractive optics

Angular spectrum method for simulation and analysis of ground glass produced laser speckle pattern

Vector-based Synthesis of Finite Aperiodic Diffractive Micro-Optical Elements with Subwavelength Structures As Beam Deflectors

Design of Diffractive Phase Element for Modulating the Electric Field at the Out-Of-Focus Plane in A Lens System

Polygon-based unified Fourier-modal approach for diffractive optics simulations

Molding the flow of light at deep sub-wavelength scale

Compact freeform illumination system design for pattern generation with extended light sources

DIFFRACTIVE OPTICAL ELEMENTS TO REALIZE UNIFORM ILLUMINATION IN INCLINED PLANES AT DIFFERENT ANGLES WITH THE OPTICAL AXIS SIMULTANEOUSLY

Generation Of Vector Beams And Their Focal Properties - Art. No. 683201