Abstract:Abstract Methane pyrolysis is an emerging technology to produce lower-carbon intensity hydrogen at scale, as long as the co-produced solid carbon is permanently captured. Partially replacing Portland cement with pyrolytic carbon would allow the sequestration at a scale that matches the needs of the H 2 industry. Our results suggest that compressive strength, the most critical mechanical property, of blended cement could even be improved while the cement manufacture, which contributes to ~ 9% global anthropogenic CO 2 emissions, can be decarbonized. A CO 2 abatement up to 10% of cement production could be achieved with the inclusion of selected carbon morphologies, without the need of significant capital investment and radical modification of current production processes. The use of solid carbon could have a higher CO 2 abatement potential than the incorporation of conventional industrial wastes used in concrete at the same replacement level. With this approach, the concrete industry could become an enabler for manufacturing a lower-carbon intensity hydrogen in a win–win solution. Impact Methane pyrolysis is an up-scalable technology that produces hydrogen as a lower carbon-intensity energy carrier and industrial feedstock. This technology can attract more investment for lower-carbon intensity hydrogen if co-produced solid carbon (potentially hundreds of million tons per year) has value-added applications. The solid carbon can be permanently stored in concrete, the second most used commodity worldwide. To understand the feasibility of this carbon storage strategy, up to 10 wt% of Portland cement is replaced with disk-like or fibrillar carbon in our study. The incorporation of 5% and 10% fibrillar carbons increase the compressive strength of the cement-based materials by at least 20% and 16%, respectively, while disk-like carbons have little beneficial effects on the compressive strength. Our life-cycle assessment in climate change category results suggest that the 10% cement replacement with the solid carbon can lower ~10% of greenhouse gas emissions of cement production, which is currently the second-largest industrial emitter in the world. The use of solid carbon in concrete can supplement the enormous demand for cement substitute for low-carbon concrete and lower the cost of the low-carbon hydrogen production. This massively available low-cost solid carbon would create numerous new opportunities in concrete research and the industrial applications.

Carbon Capture and Utilization by mineralization of cement pastes derived from recycled concrete

CO2 mineralization of demolished concrete wastes into a supplementary cementitious material – a new CCU approach for the cement industry

Sustainable Building Material from CO2 Mineralization Slag: Aggregate for Concretes and Effect of CO2 Curing

Carbonation Curing of Industrial Solid Waste‐based Aerated Concretes

Use of hydrated cement pastes (HCP) as a CO<sub>2</sub> sponge

Mechanism Underlying Early Hydration Kinetics of Carbonated Recycled Concrete Fines-Ordinary Portland Cement (CRCF-OPC) Paste

Calcium Carbonate Cement: A Carbon Capture, Utilization, and Storage (CCUS) Technique

Recycling of calcined carbonated cement pastes as cementitious materials: Proposed CCUS technology for calcium looping

Potential application of cement kiln dust in carbon capture, utilisation, and storage technology

A New, Carbon-Negative Precipitated Calcium Carbonate Admixture (PCC-A) for Low Carbon Portland Cements

Performance Assessment of Carbon Dioxide Sequestration in Cement Composites with a Granulation Technique

Sequestration of solid carbon in concrete: A large-scale enabler of lower-carbon intensity hydrogen from natural gas

Development of Ultrafine Mineral Admixture from Magnesium Slag and Sequestration of CO2

Evaluating the Carbon Footprint of Cement Plants Integrated With the Calcium Looping CO2 Capture Process

Mineral carbonation of industrial wastes for application in cement-based materials

Calcium carbonate and reactive silica recovery from waste cement: The influence of processing parameters on upcycled material properties and carbon intensity

Chemical Engineering Solution for Carbon Neutrality in Cement Industry: Tailor a Pathway from Inevitable Co2 Emission into Syngas

Utilization of solid wastes to sequestrate carbon dioxide in cement-based materials and methods to improve carbonation degree: A review

Wet-carbonation-based Mineral Extraction and CO2 Sequestration Using Concrete Waste Fines at a Low Temperature

Environmental impact assessment of post-combustion CO2 capture technologies applied to cement production plants

Mechanochemical processing of landfilled coal fly ash for enhanced CO2 sequestration and heavy metal immobilization in sustainable hydraulic cements