Abstract:Rotating machine is a common class of machinery in most of the industry and the main root cause of machinery failure is a faulty bearing. Bearings are most widely used in various types of machine elements ranging from small to heavy machinery and the common cause of machinery failure is a fault in bearings. Bearing faults can be external or internal which mainly depends on different operating conditions and these faults may cause severe damage to rotating components in machinery. Signal processing methods have traditionally been used to diagnose faults in tapered roller element bearings. A wavelet transform is the most common and effective tool for understanding and analyzing the vibration signal of bearings as it is responded quickly and observed sudden changes along with the transient impulses in the signal caused by faults in the different parts of bearing elements. In this article, localized fault's position and size on the outer ring of tapered roller bearing were investigated. Three different real values wavelets (DB2, Meyer, and Morlet) are analyzed as per Simple Sensitivity index criteria. Finally, experiments are carried out with four sets of bearing having fault on outer racing of bearing, and for the estimation of fault size, the setup was misaligned at ranging (0.00mm-1.50 mm) with a uniform deviation of 0.50 mm for each experiment. Shannon entropy was calculated for the identification of localized size of the faults with wavelets nomenclature, the result of DB2, Morlet, and Meyer wavelets at high-frequency zone are presented.The scanning electron microscope (SEM) has been taken for the estimation of size of the fault. The proposed method has been successfully implemented for measuring defect width and size. Also, it has been observed that with increased magnification level from 0.00 mm to 0.50 mm, the crack width of the faulty bearing was increased by 0.813 mm, and whenever on further increase in magnification level of 0.50, 1.00 mm and 1.50 mm the crack width of the faulty bearing was increased by 2.568 mm and 3.856 respectively.

Estimating the size of naturally generated defects in the outer ring and roller of a tapered roller bearing based on autoregressive model combined with envelope analysis and discrete wavelet transform

CONDITION MONITORING OF LOCALIZED OUTER RACE DEFECTS OF TAPER ROLLER BEARINGS USING VIBRATION ANALYSIS

Dynamic modeling and vibration analysis of double row cylindrical roller bearings with irregular-shaped defects

Rolling bearing localized defect evaluation by multiscale signature via empirical mode decomposition

Identification of localized defects and fault size estimation of taper roller bearing (NBC_30205) with signal processing using the Shannon entropy method in MATLAB for automobile industries applications

Model for dynamic characteristics produced by inner race local defect in ball bearing system and its simulation

Dynamic modelling for vibration analysis of a cylindrical roller bearing due to localized defects on raceways

Modeling and Fault Size Estimation for Non-Penetrating Damage in the Outer Raceway of Tapered Roller Bearing

Vibration Response of Ball Bearings with Different Defect Sizes in the Outer Raceway: Simulation with A 3-D Finite Element Model

Dynamic Analysis of a Cylindrical Roller Bearing with Time-Varying Localized Defects on Raceways

Experimental Verification and Nonlinear Dynamic Response Analysis of a Rolling Element Bearing with Localized Defects

Experimental Observations and Dynamic Modeling of Vibration, Characteristics of a Cylindrical Roller Bearing with Roller Defects

Rolling element bearings fault diagnosis based on physical model identification

Application of Wavelet Envelope Analysis to Rolling Bearing Diagnosis

The Effect of Fit Clearance between Outer Race and Housing on Vibration Characteristics of a Cylindrical Roller Bearing with Localized Defects

Rolling Bearing Fault Diagnosis Based on Ceemd and Time Series Modeling

New evaluation method for defects propagation in toroidal roller bearings using dominant frequency of acoustic emission

Detecting Crack Propagation Rate in Taper Roller Bearing Using FEA Analysis and Signal Processing Techniques

Dual-impulse Behavior Analysis and Quantitative Diagnosis of the Raceway Fault of Rolling Bearing

Fault Diagnosis of Rolling Element Bearings Based on Wavelet Time-frequency Frame Decomposition

Integrated Model to Predict Vibration Response of Rolling Bearings with Localized Defects and GRD Assessment