Abstract:Nowadays, separation of heavy metals from polluted wastewater is one of the most important environmental issues, and various methods have been investigated for treating polluted water and industrial wastewater. Surface adsorption using an inexpensive, biodegradable and environmentally consistent adsorbent can be considered an efficient and cost-effective method. One of these adsorbents is sodium alginate (SA). The purpose of this study was to fabricate composite nanofibers using poly (vinyl alcohol) (PVA) and sodium alginate to remove cadmium metal ion from aqueous solutions. For this purpose, polymer solutions consisting of poly (vinyl alcohol) (10% wt)/sodium alginate (2% wt) with three volume ratios of 0/100, 20/80 and 40/60 were first made, and then nanofibers were produced from the resulting solutions by electro-spinning process. The prepared nanofibers were examined by scanning electron microscopy (SEM) and the synthetic poly (vinyl alcohol)/sodium alginate nanofibers at a ratio of 40/60 were selected as adsorbent. The obtained nanofibers were characterized by Fourier-transform infrared spectroscopy (FTIR). The synthesized adsorbent was used to remove the aqueous solution of cadmium metal; the effect of various parameters such as changes in initial metal ion concentration, pH, temperature, contact time and stirring speed on the adsorption process were investigated, and optimum values of the parameters were obtained. The maximum amount of equilibrium adsorption under optimum experimental conditions was 67.05 mg/gr. The Taguchi experiment design method was used to optimize the three effective factors in the cadmium ion adsorption process. The results of the adsorption process were adapted to different adsorption isotherms such as Langmuir and Freundlich isotherms. The fit of the laboratory data to the Langmuir model was better, and the maximum adsorption capacity through this model was obtained equal to 93.163 mg/g of the adsorbent. Since the performance of an adsorbent depends on the duration of the adsorption process, the kinetics of the adsorption process were investigated by pseudo-first-order equation and pseudo-second-order equation. Moreover, the results indicated that the laboratory data showed a better fit to the pseudo-second-order model. Finally, the thermodynamic perspective was examined, and the process was found to be endothermic and spontaneous. The results showed the optimum values for maximum cadmium uptake.

Fabrication of Poly(β-Cyclodextrin-Epichlorohydrin-Thiourea) to Efficient Removal of Heavy Metal Ions from Wastewater

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Adsorption of Hydroquinone and Pb(II) from Water by Β-Cyclodextrin/polyethyleneimine Bi-Functional Polymer.

Functionalized Cyclodextrin/Carboxymethyl Cellulose Composite Hydrogel with Double Network Structure for Adsorption of Heavy Metal Ions in Wastewater

Method to Fabricate Porous Multifunction Β-Cyclodextrin Modified Resin for Ultrafast and Efficient Removal of Cu(II) and Bisphenol A

Removal of Pb(II) ions from aqueous media using epichlorohydrin crosslinked chitosan Schiff's base@Fe3O4 (ECCSB@Fe3O4)

Fabrication of nanofibers using sodium alginate and Poly(Vinyl alcohol) for the removal of Cd2+ ions from aqueous solutions: adsorption mechanism, kinetics and thermodynamics

β-CD-Induced Precipitation of Eriochrome Black T Recovered via CTAB-Assisted Foam Fractionation for Adsorption of Trace Cu(II)

Synthesis of Eco-Friendly Biopolymer, Alginate-Chitosan Composite to Adsorb the Heavy Metals, Cd(II) and Pb(II) from Contaminated Effluents

Preparation of esterified biomass waste hydrogels and their removal of Pb2+, Cu2+ and Cd2+ from aqueous solution

Adsorption performance and mechanism of pectin modified with β-cyclodextrin for Zn2+ and Cu2

Green Synthesis of Reusable Adsorbents for the Removal of Heavy Metal Ions

Green and efficient: investigating modified and non-modified walnut shells for heavy metal ion removal in clinical dental sewage treatment

Environmentally Friendly Fabrication of New Β-Cyclodextrin/zro2 Nanocomposite for Simultaneous Removal of Pb(II) and BPA from Water.

Enhanced sequestration of heavy metals from aqueous solution on polyacrylamide grafted with cell@Fe3O4 nanocomposite

Simultaneous adsorption of heavy metals and organic dyes by β-Cyclodextrin-Chitosan based cross-linked adsorbent

Efficient removal of Cu(II) from an aqueous solution using a novel chitosan assisted EDTA-intercalated hydrotalcite-like compound composite: Preparation, characterization, and adsorption mechanism

Removal of Cd2+ and Cr3+ ions from Aqueous Solution by Modified Polypropylene Plastic Waste: Equilibrium Study

Effective fabrication and characterization of eco-friendly nano particles composite for adsorption Cd (II) and Cu (II) ions from aqueous solutions using modelling studies

Citric acid modified β-cyclodextrin for the synthesis of water-stable and recoverable CD-MOF with enhanced adsorption sites: Efficient removal of Congo red and copper ions from wastewater

Retrieval of Cu2+ and Cd2+ ions from aqueous solutions using sustainable guar gum/PVA/montmorillonite nanocomposite films: effect of temperature and adsorption isotherms