Abstract:Keeping water clean is of vital significance for human health and environmental protection. In order to remove organic micro-pollutants and natural organic substances in water bodies and kill pathogenic microorganisms simultaneously, this study synthesized a multifunctional porous β-cyclodextrin polymer with a high specific surface area by introducing quaternary ammonium groups and rigid benzene rings, respectively, which was then polymerized with crosslinking agent-4,4′-bis (chloromethyl)-1,1′-biphenyl (BCMBP) in an ionic liquid system. The grafting of quaternary ammonium groups was beneficial for the removal of negative-charged humic acid (HA) and sterilization. The introduction of numerous rigid structures during benzylation and Friedel-Crafts alkylation reaction could significantly improve the porosity and specific surface area of the polymer, conducive to the exposure of cyclodextrin binding sites and contaminant adsorption. By changing the proportions of quaternization and benzylation, the structure and surface properties of the polymer could be adjusted, thus further regulating the adsorption performance. Compared with activated carbon, the polymer named BQCD-BP with a huge surface area of 1133 m 2 g −1 prepared under optimized conditions showed outstanding adsorption performance and sterilization ability. The pseudo-second-order kinetic constant of BQCD-BP reached 1.2058 g·mg −1 ·min −1 , which was approximately 50 times greater than that of activated carbon (0.0256 g·mg −1 ·min −1 ) under the same experimental condition. The adsorption capacity of BQCD-BP to HA was twice as high as that to AC, and the antibacterial ability of BQCD-BP was significant, achieving 90% at the dosage of 1g L −1 . Moreover, the adsorption process was hardly affected by the hydrochemical conditions, and the polymer was easy to regenerate. In addition, the excellent adsorption and antibacterial performance of the polymer were also identified by natural water treatment. COD was almost completely removed, and the removal efficiency of TP reached 92% after contact with BQCD-BP. The sterilization rate of BQCD-BP to viable bacteria in complex water bodies reached 82%. Undoubtedly, BQCD-BP is a potential multifunctional water treatment material with reasonable design in the actual water purification.

Adsorption of Hydroquinone and Pb(II) from Water by Β-Cyclodextrin/polyethyleneimine Bi-Functional Polymer.

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Fabrication of Poly(β-Cyclodextrin-Epichlorohydrin-Thiourea) to Efficient Removal of Heavy Metal Ions from Wastewater

Concurrent elimination and stepwise recovery of Pb(II) and bisphenol A from water using β–cyclodextrin modified magnetic cellulose: adsorption performance and mechanism investigation

Development of Β-Cyclodextrin-modified Poly(chloromethyl Styrene) Resin for Efficient Adsorption of Cu(Ⅱ) and Tetracycline

Efficient adsorption of BPA and Pb 2+ by sulfhydryl-rich β-cyclodextrin polymers

Removal of Cd(II) and anthracene from water by 13-cyclodextrin functionalized magnetic hydrochar: Performance, mechanism and recovery

Adsorptive Removal of Bisphenol A, Chloroxylenol, and Carbamazepine from Water Using a Novel Β-Cyclodextrin Polymer.

Method to Fabricate Porous Multifunction Β-Cyclodextrin Modified Resin for Ultrafast and Efficient Removal of Cu(II) and Bisphenol A

Multifunctional Β-Cyclodextrin Polymer for Simultaneous Removal of Natural Organic Matter and Organic Micropollutants and Detrimental Microorganisms from Water.

Multifunctional porous β-cyclodextrin polymer for water purification

Polydopamine Modified Cyclodextrin Polymer As Efficient Adsorbent for Removing Cationic Dyes and Cu2.

Adsorption performance and mechanism of pectin modified with β-cyclodextrin for Zn2+ and Cu2

Citric Acid-Crosslinked Β-Cyclodextrin for Simultaneous Removal of Bisphenol A, Methylene Blue and Copper: the Roles of Cavity and Surface Functional Groups

Removal of Cu(II) from aqueous solution using synthetic poly(catechol-diethylenetriamine-p-phenylenediamine) particles

Removal of Pb(II) from Aqueous Solution Using Dithiocarbamate Modified Chitosan Beads with Pb(II) As Imprinted Ions

Investigating the adsorption behavior and mechanism of Eu(III) and Au(III) on β-cyclodextrin/polyethylenimine functionalized waste paper

Simultaneously enhanced removal and stepwise recovery of atrazine and Pb(II) from water using β-cyclodextrin functionalized cellulose: Characterization, adsorptive performance and mechanism exploration.

Synthesis of β-cyclodextrin polymer and selective adsorption for phenol

Adsorption of Cu(II), Pb(II), Co(II), Ni(II), and Cd(II) from Aqueous Solution by Poly(aryl Ether Ketone) Containing Pendant Carboxyl Groups (PEK-L): Equilibrium, Kinetics, and Thermodynamics

Investigation of the adsorption mechanisms of Pb(II) and 1-naphthol by β-cyclodextrin modified graphene oxide nanosheets from aqueous solution