Abstract:An Al-Cu matrix composite reinforced with uniformly-distributed micron- and nano-double-sized TiC particles (MNDS-TiCps) was successfully fabricated using a wire and arc additive manufacturing (WAAM) process. The combined effect of the MNDS-TiCps on the precipitation of the theta '' phase, the structural evolution of the grain boundaries, and solidification dynamics of the deposited Al-Cu matrix composites were subsequently investigated. The micron-sized TiC particles in the molten pool generate nucleation undercooling (Delta T-nu, similar to 0.32 K) which inhibits grain boundary segregation due to constitutional undercooling and promotes the redistribution of the Cu solute in the Al matrix. The phase composition at the grain boundaries changes from theta-Al2Cu to alpha-Al + theta-Al2Cu and the non-coherent interface between the alpha+theta transition zone and theta grain boundary is transformed into a coherent interface between the alpha+theta grain boundary and Al matrix, i.e. (211)(theta-Al2Cu)//(111)(Al). The decrease in free energy within the Al matrix provides energy to facilitate the growth of nuclei on the surface of the nano-sized particles. A semi-coherent interface is thus detected between the TiC and precipitates, characterized by a crystal orientation relationship of (200)(TiC)//(310)(theta ''-Al2Cu). The dislocations that provide pipe-diffusion paths for solute Cu constitute a driving force that coarsens the precipitates, promoting the precipitation of theta '' precipitates. Multi-site co-deformation combined with dislocation increment inhibits stress damage to the micro-interface. The strength and elongation increase by 51.0 % and 118 %, respectively, compared to specimens without TiC. This work provides a novel perspective for tailoring WAAM-deposited Al-Cu alloys by achieving favorable structural evolution in the grain boundaries, inducing the precipitation of precipitates, and yielding outstanding synergy between ductility and strength.

In-situ strengthening of a high strength low alloy steel during Wire and Arc Additive Manufacturing (WAAM)

Enhanced High-Temperature Strength and Ductility of Wire Arc Additive Manufactured Al-Ce-Mg Alloys with Fine Α-Al/al11ce3 Eutectics

Research on Adding Nano-SiC Reinforced Wire Arc Additive Manufacturing Stainless Steel

Wire Arc Additive Manufacturing of Al-Cu Alloy-Grain Refinement, Strengthening and Thermal Simulation

Wire and Arc Additive Manufacturing of High‐Strength Low‐Alloy Steel: Microstructure and Mechanical Properties

Wire Arc Additive Manufacturing with Novel Al-Mg-Si Filler Wire—Assessment of Weld Quality and Mechanical Properties

Research on Cu-6.6%Al-3.2%Si Alloy by Dual Wire Arc Additive Manufacturing

Development of a New High Strength Alloy from Low Alloy Steel Wire by Innovative Additional Cold Wire Feeding Used in Wire Arc Additive Manufacturing

Wire arc additive manufacturing using high-strength steel tubular and solid wires

Comparative Study on Wire-Arc Additive Manufacturing and Conventional Casting of Al–Si Alloys: Porosity, Microstructure and Mechanical Property

Microstructure and Mechanical Properties of AlSi7Mg0.6 Aluminum Alloy Fabricated by Wire and Arc Additive Manufacturing Based on Cold Metal Transfer (WAAM-CMT)

Wire Arc Additive Manufacturing of Al-Mg Alloy with the Addition of Scandium and Zirconium

Contribution Made by Double-Sized TiC Particles Addition to the Ductility–strength Synergy in Wire and Arc Additively Manufactured Al–Cu Alloys

In-depth study of the mechanical properties for Fe3Al based iron aluminide fabricated using the wire-arc additive manufacturing process

Realization of synergistic enhancement for fracture strength and ductility by adding TiC particles in wire and arc additive manufacturing 2219 aluminium alloy

Wire and Arc Additive Manufacturing of Fe-based shape memory alloys: microstructure, mechanical and functional behavior

Microstructure and Mechanical Properties of Low-Carbon High-Strength Steel Fabricated by Wire and Arc Additive Manufacturing

Multiscale modelling of microstructure, micro-segregation, and local mechanical properties of Al-Cu alloys in wire and arc additive manufacturing

Mechanical properties and microstructure characteristics of wire arc additively manufactured high-strength steels

Wire + Arc Additive Manufacturing and Heat Treatment of Super Martensitic Stainless Steel with a Refined Microstructure and Excellent Mechanical Properties

Wire arc direct energy deposited multiphase steel through in situ micropowder alloying: mechanical and metallurgical studies