Abstract:With the fast in population development, there are a higher demand in housing and infrastructure such as high-rise buildings and long-span bridges. Therefore, high performance concrete (HPC) is used massively due to its technical and economical advantages to fulfil people demands towards the concrete usage. Optimum mineral blended admixture replacement ratio with the addition of superplasticizer are the main component which contributed to the formation of HPC in terms of high workability, high strength and high durability. Hence, the optimal cement to blended mineral admixture ratio with the optimum addition of PCE type superplasticizer to achieve the targeted mechanical strength performance of G60 and reduce the drying shrinkage behavior which will results in crack of the ternary blended concrete is highlighted in this report. The influence of the addition of two mineral blended admixture, ground granulated blast furnace slag (GGBS) and pulverized fly ash (PFA) with the ordinary Portland cement (OPC) in different ratio on engineering performance and its drying shrinkage behavior in the age of 7 days, 28 days and 90 days based on different mineral blended admixture replacement level in 50%, 60%, 70% and 80% which GGBS to PFA ratio are controlled in 4:1 and the water to cement ratio was kept in 0.35 is studied. There are two types of PCE type superplasticizer (SP) was added to enhance the workability of the fresh concrete and act as slump retainer. Ternary blended concrete results in low early age (7 days) strength but the performance at later age (28 days and beyond) was encouraging. Results revealed that 80% replacement level have the remarkable result in terms of mechanical strength and drying shrinkage behavior. The study showed that, presence of mineral additives with superplasticizer will produce a similar or enhance the concrete strength properties with the inclusion of GGBS and PFA at the ratio of 4:1 up to 80% as cement replacement.

The Effects of Fineness and TEA-Based Chemical Admixture on Early Strength Development of Concrete in Construction Site Applications

Influences of Chemical Composition and Fineness on the Development of Concrete Strength by Curing Conditions

Effects of Accelerators and Retarders in Early Strength Development of Concrete Based on Low-Temperature-Cured Ordinary Portland and Calcium Sulfoaluminate Cement Blends

Effects of Mineral Admixture on Properties of Young Concrete

Experimental study on strength and abrasion-resistance enhancement admixture

Impact of triethanolamine on the hydration of Portland cement in the presence of high pozzolanic activity supplementary cementitious materials

Long-term Compressive Strength Properties of Concrete Incorporating Admixtures: Outdoor Exposure Testing in a Coastal Environment

Study of the effect of calcium nitrate, calcium formate, triethanolamine, and triisopropanolamine on compressive strength of Portland-pozzolana cement

THE MECHANICAL STRENGTH AND DRYING SHRINKAGE BEHAVIOR OF HIGH PERFORMANCE CONCRETE WITH BLENDED MINERAL ADMIXTURE

Long-term strength and durability performance of eco-friendly concrete with supplementary cementitious materials

Study on the Influence of Early Strength Polycarboxylate Superplasticizer on Early Performance of Concrete

Study on Strength and Microstructure of Cement-Based Materials Containing Combination Mineral Admixtures

Factors Influencing the Hydration, Dimensional Stability, and Strength Development of the OPC-CSA-Anhydrite Ternary System

Mechanism of triethanolamine on Portland cement hydration process and microstructure characteristics

THE STRENGTH EFFECT OF MINERAL ADMIXTURE ON CEMENT CONCRETE

Effects of Triethanolamine on Autogenous Shrinkage and Drying Shrinkage of Cement Mortar

Experimental Study of the Effect of Early Strength Admixture on Cement Stabilized Macadam Material

Effect of diethanolisopropanolamine and ethyldiisopropylamine on hydration and strength development of cement-fly ash-limestone ternary blend

Effects of Retarding Admixture, Superplasticizer and Supplementary Cementitious Material on the Rheology and Mechanical Properties of High Strength Calcium Sulfoaluminate Cement Paste

Mechanical Performance of Portland Cement, Coarse Silica Fume, and Limestone (PC-SF-LS) Ternary Portland Cements

Effects of active mineral admixture on mechanical properties and durability of concrete