Abstract:One of the sources of sustainable energy with great, still untapped potential is wind power. One way to harness such potential is to develop technology for offshore use, more specifically at high depths with floating turbines. It is always critical that their structural designs guarantee that their natural frequencies of vibration do not match the frequencies of the most important oscillatory loads to which they will be subjected. This avoids resonance and its excessive undesired oscillatory responses. Based on that, a 3D finite element model of a 15 MW semi-submersible floating offshore wind turbine was developed in the commercial software ANSYS Mechanical ® to study its dynamic behavior and contribute to the in-depth analysis of structural modeling of FOWTs. A tower and floating platform were individually modeled and coupled together. The natural frequencies and modes of vibration of the coupled system and of its components were obtained by modal analysis, not only to verify the resonance, but also to investigate the determinant factors affecting such behaviors, which are not extensively discussed in literature. It was found that there is strong coupling between the components and that the tower affects the system as a result of its stiffness, and the floater as a result of its rotational inertia. The platform’s inertia comes mainly from the ballast and the effects of added mass, which was considered to be a literal increase in mass and was modeled in two manners: first, it was approximately calculated and distributed along the submerged flexible platform members and then as a nodal inertial element with the floater being considered as a rigid body. The second approach allowed an iterative analysis for non-zero frequencies of vibration, which showed that a first approximation with an infinite period is sufficiently accurate. Furthermore, the effects of the mooring lines was studied based on a linear model, which showed that they do not affect the boundary conditions at the bottom of the tower in a significant way.

Modal analysis for optimal design of offshore wind turbine blades

Structural analysis of offshore wind turbine blades using finite element method

3D Multiscale Dynamic Analysis of Offshore Wind Turbine Blade under Fully Coupled Loads

Design and Optimization of Composite Offshore Wind Turbine Blades

Design optimization of composite wind turbine blades considering tortuous lightning strike and non-proportional multi-axial fatigue damage

Aerodynamic Design and Modal Analysis on Wind Turbine Blade Based on CAD/CAE

Non-linear dynamic analysis of a wind turbine blade

Finite Element Analysis of Composite Offshore Wind Turbine Blades Under Operating Conditions

Modal Analysis of 15 MW Semi-Submersible Floating Wind Turbine: Investigation on the Main Influences in Natural Vibration

Computational Analysis of Stiffness Reduction Effects on the Dynamic Behaviour of Floating Offshore Wind Turbine Blades

THE STRUCTURAL ANALYSIS METHOD OF WIND TURBINE BLADE BASED ON MECHANICS OF COMPOSITE MATERIALS

Study of Centrifugal Stiffening on the Free Vibrations and Dynamic Response of Offshore Wind Turbine Blades

Modal Analysis of Offshore Monopile Wind Turbine: An Analytical Solution

Numerical Modeling and Analysis of a Horizontal Axis RM1 NACA-4415 Wind Turbine

Topology Optimization-Driven Design for Offshore Composite Wind Turbine Blades

Finite element modeling optimization of wind turbine blades from an earthquake engineering perspective

Modal Analysis of the Wake Shed Behind a Horizontal Axis Wind Turbine with Flexible Blades

Parametric Study of Accidental Impacts on an Offshore Wind Turbine Composite Blade

Modal Re‐analysis of Rotary Wind Turbine Blades in Refinement Design

Nonlinear vibration analysis of horizontal axis wind turbine blades using a modified pseudo arc-length continuation method

Studying and analysis of deformation and stresses in horizontal-axis wind turbine using fluid-structure interaction method