Abstract:Wind Engineering, Ahead of Print. Fluid-structure interaction (FSI) studies have become an important tool in the development of wind turbine blades as well as for analyzing and optimizing Horizontal Axis Wind Turbine (HAWT). The most essential elements for estimating the turbine blade strength to withstand extreme wind loads and aerodynamic performance are the blade deformation and the associated stresses. This study aims to compare the strength and analyze the deformation behavior of two models of HAWT blades. A three-dimensional model was created and loaded into a Finite Element (FE) model for analysis. The Computational Fluid Dynamics (CFD) investigation was coupled with the structural model using one-way FSI. In this article, the effect of the aerodynamics on the blade surface of a small HAWT has been studied numerically and experimentally. The airfoil used for the blade profile is S826 airfoil. To provide an appropriate displacement for static measurements, the blade in the experimental investigation is made of thermoplastic polyurethane material (TPU). It is noted that the current experimental findings verify the simulation results, and a comparison between the simulations and the experimental findings reveals a reasonable agreement. The numerical simulations are also implemented on a HAWT epoxy E-glass unidirectional (EEGUD) material. It can be concluded from this study that the blade deformation and stress on the blades are related to the wind speed. The deformation along the span length exhibits nonlinear variation that gradually increases from the blade root and reaches its maximum at the blade tip position. The tip deflection and equivalent stress were found to increase with an increase in wind speed. The dynamic analysis at different tip speed ratios shows the highest deformation at λ = 4, for wind speed of 20 m/s.

Finite Element Analysis of Composite Offshore Wind Turbine Blades Under Operating Conditions

Structural analysis of offshore wind turbine blades using finite element method

3D Multiscale Dynamic Analysis of Offshore Wind Turbine Blade under Fully Coupled Loads

Design and Optimization of Composite Offshore Wind Turbine Blades

AE health monitoring technique for composite wind turbine blade: a state-of-art review

Parametric Study of Accidental Impacts on an Offshore Wind Turbine Composite Blade

Finite Element Analysis for Composite Blade Structure of Large Wind Turbine

Reliability-Based Lifetime Fatigue Damage Assessment of Offshore Composite Wind Turbine Blades

Modal analysis for optimal design of offshore wind turbine blades

THE STRUCTURAL ANALYSIS METHOD OF WIND TURBINE BLADE BASED ON MECHANICS OF COMPOSITE MATERIALS

Numerical Modeling and Analysis of a Horizontal Axis RM1 NACA-4415 Wind Turbine

Computational Analysis of Stiffness Reduction Effects on the Dynamic Behaviour of Floating Offshore Wind Turbine Blades

Integrating variable wind load, aerodynamic, and structural analyses towards accurate fatigue life prediction in composite wind turbine blades

Damage Mode Identification of Composite Wind Turbine Blade under Accelerated Fatigue Loads Using Acoustic Emission and Machine Learning

Simulation of fatigue failure in a full composite wind turbine blade

Studying and analysis of deformation and stresses in horizontal-axis wind turbine using fluid-structure interaction method

Structural Performance Of A Glass/Polyester Composite Wind Turbine Blade With Flatback And Thick Airfoils

Aerodynamic and structural analysis for blades of a 15MW floating offshore wind turbine

Study of Centrifugal Stiffening on the Free Vibrations and Dynamic Response of Offshore Wind Turbine Blades

Failure Test and Finite Element Simulation of a Large Wind Turbine Composite Blade under Static Loading

Quick Method for Aeroelastic and Finite Element Modeling of Wind Turbine Blades