Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. As an aluminum-based reinforcement, Mg2Si particles have excellent properties such as high hardness, high melting point, and high elastic modulus compared with other reinforcements and are widely used in aerospace and automobile fields. However, there is little research on the cutting mechanism of this material. In order to explore the surface grinding mechanism of Mg2Si/Al composites, Grinding simulation of low-volume fraction Mg2Si/Al composites was carried out by ABAQUS, and the influence of different positions of matrix and particle removal on the surface quality of Mg2Si/Al composites was expounded. The plane reverse grinding test was carried out by using CBN (boron nitride) grinding wheel. The L16(43) orthogonal test and three groups of single factor tests were designed. The orthogonal results show that the linear velocity of the grinding wheel has the greatest influence on the surface roughness, and the feed rate and grinding depth are significantly smaller. The range analysis shows that the optimal grinding parameters are: vs = 35 m/s, vw = 0.75 m/min, ap = 0.015 mm. The regression equation for surface roughness was established by using MATLAB. The single factor results show that the surface quality is obviously improved by increasing the linear velocity of the grinding wheel and reducing the feed rate and grinding depth through the observation of the morphology of the processed specimen. The analysis results show that defects such as pits, protrusions, burrs, and a small amount of fish-scale-like on the machined surface are mainly caused by the linear velocity of the grinding wheel, the pulling force of the grinding wheel, and the adhesion of the debris. The defects such as particle micro-cracks, particle pull-out, and matrix cracking on the subsurface, are mainly caused by the compressive stress of the grinding wheel and the stress concentration of the particles. The research results have guiding significance for future composite material cutting research and actual cutting processing.

High speed machining and optimisation of Al/SiC/Gr hybrid metal matrix composites using ANOVA and grey relational analysis

A combined approach to grey relational analysis and principal component analysis for development of input parameters in the wear characterization of Al7075 (SiC+Al2O3) hybrid metal matrix composites

Optimizing the machining variables in CNC turning of aluminum based hybrid metal matrix composites

Enhancing friction and wear performance in hybrid aluminum composites through grey relational analysis

Synthesis of AA8050/B4C/TiB2 Hybrid Nanocomposites and Evaluation of Computer-Aided Machining Parameters

Analysis of the influence of cutting parameters on surface roughness and cutting forces in high speed face milling of Al/SiC MMC

Investigation on Electrical Discharge Machining Parameters of Aluminium7075/Boron Carbide/Titanium Diboride Hybrid Composites by Grey Relational Analysis

ASSESSMENT OF MACHINABILITY BEHAVIOUR OF LM24 – NANO Al2O3 – Gr HYBRID COMPOSITES THROUGH STIR CASTING TECHNIQUE

Characterization and optimization analysis on surface finish and energy consumption in turning of Al-4032/GMP MMC produced by stir casting

TAGUCHI-GREY OPTIMIZATION OF SURFACE ROUGHNESS AND MATERIAL REMOVAL RATE ON ELECTRO-DISCHARGE MACHINING OF NOVEL AA7075-TiO2 METAL MATRIX COMPOSITE USING WASTE CORNCOB BIOSILICA DIELECTRICS

Effect of surface roughness and study of cutting force in milling of Al/Sic metal matrix composites

WEDM of Al/SiC/Ti composite: A Hybrid Approach of RSM-ARAS-TLBO Algorithm

Mechanical and Sliding Wear Performance of AA356-Al2O3/SiC/Graphite Alloy Composite Materials: Parametric and Ranking Optimization Using Taguchi DOE and Hybrid AHP-GRA Method

Parametric optimisation of milling process for the machining of carbon nanotubes-based hybrid aluminium composite

Optimization of surface roughness and cutting force during AA7039/Al2O3 metal matrix composites milling using neural networks and Taguchi method

Experimental study on grinding process of Al-Mg2Si aluminum matrix composites

Machinability studies of Al–4Mg/ in-situ MgAl2O4 nano composites: measurement of cutting forces and machined surface roughness

Effect of reinforced particles on the machinability of Al alloy under MQL, cryogenic, and hybrid lubrication

Face Grinding Surface Quality of High Volume Fraction SiCp/Al Composite Materials

A review on conventional and nonconventional machining of SiC particle-reinforced aluminium matrix composites

Empirical investigation on controlled porosity level and dry sliding wear behavior of Al7075-(T6) doped with SiC+MoS2 based hybrid composites via advanced vacuum-assisted stir casting