Abstract:Sulfur hexafluoride (SF6) gas, widely used in high-voltage circuit breakers, has a high global warming potential and hence substitutes are being sought. The use of a mixture of carbon tetrafluoride (CF4) and SF6 is examined here. It is known that this reduces the breakdown voltage at room temperature. However, the electrical breakdown in a circuit breaker after arc interruption occurs in a hot gas environment, with a complicated species composition because of the occurrence of dissociation and other reactions. The likelihood of breakdown depends on the electron interactions with all these species. The critical reduced electric field strength (the field at which breakdown can occur, relative to the number density) of hot SF6/CF4 mixtures corresponding to the dielectric recovery phase of a high voltage circuit breaker is calculated in the temperature range from 300K to 3500 K. The equilibrium compositions of hot SF6/CF4 mixtures under different mixing fractions were determined based on Gibbs free energy minimization. Full sets of improved cross sections for interactions between electrons and the species present are presented. The critical reduced electric field strength of these mixtures was obtained by balancing electron generation and loss mechanisms. These were evaluated using the electron energy distribution function derived from the Boltzmann transport equation under the two-term approximation. The result indicates that critical electric field strength decreases with increasing heavy-particle temperature from 1500 to 3500 K. Good agreement was found between calculations for pure hot SF6 and pure hot CF4 and experimental results and previous calculations. The addition of CF4 to SF6 was found to increase the critical reduced electric field strength for temperatures above 1500 K, indicating the potential of replacing SF6 by SF6/CF4 mixtures in high-voltage circuit breakers. (C) 2013 AIP Publishing LLC.

Breakdown characteristics of carbon dioxide–ethane azeotropic mixtures near the critical point

Modelling of Electrical Breakdown in Supercritical CO2 with Molecular Clusters Formation

Dielectric breakdown properties of hot SF{sub 6}-CO{sub 2} mixtures at temperatures of 300–3500 K and pressures of 0.01–1.0 MPa

Dielectric Breakdown Properties of Hot SF6-CO2 Mixtures at Temperatures of 300–3500 K and Pressures of 0.01–1.0 MPa

Study of the Dielectric Breakdown Properties of Hot SF6–CF4 Mixtures at 0.01–1.6 MPa

Investigation on the Reduced Critical Breakdown Field of Hot CO2 Gas and CO2-based Mixtures

Study of Dielectric Breakdown Properties in 50%SF6-50%CF4 Mixtures at 1 Atm

Investigation of dielectric breakdown properties of sf 6 – n 2 and sf 6 – cf 4 mixtures at 0 . 4 mpa and gas temperatures up to 3000

Prediction of the critical reduced electric field strength for carbon dioxide and its mixtures with 50% O2 and 50% H2 from Boltzmann analysis for gas temperatures up to 3500?K at atmospheric pressure

Dielectric Breakdown Properties of SF6–N2 Mixtures at 0.01–1.6 MPa and 300–3000 K

Weibull Statistical Analysis of Pulsed Breakdown Voltages in High-Pressure Carbon Dioxide Including Supercritical Phase

DC Breakdown Characteristics of C₄F₇N/CO₂ Mixtures with Particle-in-Cell Simulation

Investigation on Critical Breakdown Electric Field of Hot Sulfur Hexafluoride/Carbon Tetrafluoride Mixtures for High Voltage Circuit Breaker Applications

Numerical Simulation of Breakdown Properties and Streamer Development Processes in SF6/CO2 Mixed Gas

Study of the dielectric breakdown strength of CO2–O2 mixtures by considering ion kinetics in a spatial–temporal growth avalanche model

Negative DC Dielectric Breakdown Characteristics and Synergistic Effect of HFO-1336mzz(E) Mixtures

Breakdown Electric Field of Hot 30% CF 3 I/CO 2 Mixtures at Temperature of 300–3500 K During Arc Extinction Process

Experiment Of Dielectric Strength Of C5f10o Gas Mixture And Calculation Of Stratification

Breakdown Characteristics of a Fluoronitrile Mixture Gas According to Mixing Ratio and Oxygen Content for High-Voltage Power Equipment Application

Breakdown Characteristics of CF3I-N2 Gas Mixtures in a Needle-Plate Geometry

Influence of O2 on the Dielectric Properties of CO2 at the Elevated Temperatures