Abstract:In this work, the SnO 2 -Ti 3 C 2 hybrid electron transport layer (ETL) was prepared by incorporating two-dimensional Ti 3 C 2 -MXene into SnO 2 and appropriate ultraviolet (UV) ozone treatment. The synergistic effect of Ti 3 C 2 introduction and UV ozone treatment on the charge transport capacity of SnO 2 ETL, interface properties of ETL/perovskite, perovskite morphology, and device performance was systematically investigated. The results show that the introduction of Ti 3 C 2 does not affect the morphology and transmittance of SnO 2 ETL. The perovskite films based on SnO 2 -Ti 3 C 2 are not only dense, but also have smaller surface roughness, more uniform, and larger grain size, even penetrating the entire perovskite film. The surface oxidation of Ti 3 C 2 induced by UV-ozone treatment enhanced the charge transport capacity of ETL. The electron extraction and charge transfer at the interface between SnO 2 -Ti 3 C 2 ETL and perovskite are higher, and carrier recombination is effectively suppressed. Perovskite solar cells (PSCs) based on SnO 2 -Ti 3 C 2 ETL have larger charge recombination impedance and higher electron mobility, mainly due to enhanced ETL charge transport and optimization of interface properties. The short-circuit current ( J sc) and filling factor (FF) of PSCs are increased by 5% and 7% respectively, delivering a champion device with a relatively high FF of 79.38% and high power conversion efficiency of 19.52%, as well as good stability. Thus, this study provides a simple and effective method for the preparation of efficient and repeatable PSCs and paves the way for the industrialization of PSCs to a certain extent.

Aqueous Sn-S Complex Derived Electron Selective Layer for Perovskite Solar Cells

Enhancing Electron Extraction and Transport in Inorganic Perovskite Solar Cells Via Additional Built-in Potential of SnO2-BiFeO3 Nano-Heterostructure

Electrochemical Reduction and Ion Injection of Annealing‐Free SnO2 for High Performance Perovskite Solar Cells

[(C8h17)4n]4[siw12o40] (tasiw‐12)‐modified SnO2 Electron Transport Layer for Efficient and Stable Perovskite Solar Cells

Insight into Perovskite Solar Cells Based on Sno2 Compact Electron-Selective Layer

Annealing-Free Cr2 O3 Electron-Selective Layer for Efficient Hybrid Perovskite Solar Cells

Heterovalent Samarium Cation‐Doped SnO2 Electron Transport Layer for High‐Efficiency Planar Perovskite Solar Cells

Effective Carrier-Concentration Tuning of SnO2 Quantum Dot Electron-Selective Layers for High-Performance Planar Perovskite Solar Cells

Multi-cation hybrid stannic oxide electron transport layer for high-efficiency perovskite solar cells

Dependence Of Precursors On Solution-Processed Sno2 As Electron Transport Layers For Cspbbr3 Perovskite Solar Cells

Sequential Deposition of Diluted Aqueous SnO2 Dispersion for Perovskite Solar Cells

Polyelectrolyte-Doped SnO<sub>2</sub> as a Tunable Electron Transport Layer for High-Efficiency and Stable Perovskite Solar Cells

Polysaccharide Modified SnO2 for Highly Efficient Perovskite Solar Cells

SnO2-Ti3C2 Blends As Electron Transport Layer for Efficient and Easily Fabricated Planar Perovskite Solar Cells

Dependence of Precursors on Solution-Processed SnO<sub>2</sub> as Electron Transport Layers for CsPbBr<sub>3</sub> Perovskite Solar Cells

High-effective SnO2-based perovskite solar cells by multifunctional molecular additive engineering

Zirconium acetate stabilized tin dioxide colloidal quantum dots as multifunctional electron transporting layer for efficient and stable perovskite solar cells

Solvent engineering of SnO2 electron transport layer for high-performance perovskite solar cells

Annealing-Free SnO 2 Layers for Improved Fill Factor of Perovskite Solar Cells

Managing Interfacial Defects and Charge-Carriers Dynamics by a Cesium-Doped SnO2 for Air Stable Perovskite Solar Cells

Conductive chelating agent treating electron transfer layer for environment-friendly and efficient perovskite solar cells