Abstract:Recent experiments in DIII-D [J. L. Luxon et al., in Plasma Physics and Controlled Nuclear Fusion Research 1996 (International Atomic Energy Agency, Vienna, 1987), Vol. I, p. 159] have led to the discovery of a means of modifying edge turbulence to achieve stationary, high confinement operation without Edge Localized Mode (ELM) instabilities and with no net external torque input. Eliminating the ELM-induced heat bursts and controlling plasma stability at low rotation represent two of the great challenges for fusion energy. By exploiting edge turbulence in a novel manner, we achieved excellent tokamak performance, well above the H98y2 international tokamak energy confinement scaling (H98y2 = 1.25), thus meeting an additional confinement challenge that is usually difficult at low torque. The new regime is triggered in double null plasmas by ramping the injected torque to zero and then maintaining it there. This lowers E × B rotation shear in the plasma edge, allowing low-k, broadband, electromagnetic turbulence to increase. In the H-mode edge, a narrow transport barrier usually grows until MHD instability (a peeling ballooning mode) leads to the ELM heat burst. However, the increased turbulence reduces the pressure gradient, allowing the development of a broader and thus higher transport barrier. A 60% increase in pedestal pressure and 40% increase in energy confinement result. An increase in the E × B shearing rate inside of the edge pedestal is a key factor in the confinement increase. Strong double-null plasma shaping raises the threshold for the ELM instability, allowing the plasma to reach a transport-limited state near but below the explosive ELM stability boundary. The resulting plasmas have burning-plasma-relevant βN = 1.6–1.8 and run without the need for extra torque from 3D magnetic fields. To date, stationary conditions have been produced for 2 s or 12 energy confinement times, limited only by external hardware constraints. Stationary operation with improved pedestal conditions is highly significant for future burning plasma devices, since operation without ELMs at low rotation and good confinement is key for fusion energy production.

Creation and sustainment of wide pedestal quiescent H-mode with zero net neutral beam torque

Quiescent H-mode operation using torque from non-axisymmetric, non-resonant magnetic fields

Discovery of stationary operation of quiescent H-mode plasmas with net-zero neutral beam injection torque and high energy confinement on DIII-D

Numerical modeling of pedestal stability and broadband turbulence of wide-pedestal QH-mode plasmas on DIII-D

Second Stable Regime of Internal Kink Modes Excited by Barely Passing Energetic Ions in Tokamak Plasmas

Towards Model-Based Current Profile Control at DIII-D

TRANSPORT AND STABILITY IN SUSTAINED HIGH q_min, HIGH β_N DISCHARGES ON DIII-D

ELM-free Enhanced Dα H-mode with Near Zero NBI Torque Injection in DIII-D Tokamak

MHD simulations of formation, sustainment and loss of Quiescent H-mode in the all-tungsten ASDEX Upgrade

Impact of E × B shear flow on low-n MHD instabilities

Enhanced pedestal transport driven by edge collisionality on Alcator C-Mod and its role in regulating H-mode pedestal gradients

Use of differential plasma rotation to prevent disruptive tearing mode onset from 3-wave coupling

Novel intrinsic helical cores and MHD dynamo flux pumping evidence in DIII-D

Elements of H-mode pedestal structure

Edge State Selection by Modulating E × B Shearing Profile in Toroidally Confined Plasmas

Particle control via cryopumping and its impact on the edge plasma profiles of Alcator C-Mod

Pedestal properties of negative triangularitydischarges in ASDEX Upgrade

Tungsten control in nbi-dominant h-mode discharges in east tokamak

Observation of a new pedestal stability regime in MAST Upgrade H-mode plasmas

The effect of plasma toroidal rotation on n=1 resonant magnetic perturbation field penetration under low neutral beam injection torque in EAST

Investigation of the long-lived saturated internal mode and its control on the HL-2A tokamak