Abstract:The importance of amorphous and nanocrystalline Fe-based soft magnetic materials is increasing annually. Thus, characterisation of the chemical compositions, alloying additives, and crystal structures is significant for obtaining the appropriate functional properties. The purpose of this work is to present comparative studies on the influence of Nb (1, 2, 3 at.%) and Mo (1, 2, 3 at.%) in Fe substitution on the thermal stability, crystal structure, and magnetic properties of a rapidly quenched Fe79.4Co5Cu0.6B15 alloy. Additional heat treatments in a vacuum (260-640 °C) were performed for all samples based on the crystallisation kinetics. Substantial improvement in thermal stability was achieved with increasing Nb substitution, while this effect was less noticeable for Mo-containing alloys. The heat treatment optimisation process showed that the least lossy states (with a minimum value of coercivity below 10 A/m and high saturation induction up to 1.7 T) were the intermediate state of the relaxed amorphous state and the nanocomposite state of nanocrystals immersed in the amorphous matrix obtained by annealing in the temperature range of 340-360 °C for 20 min. Only for the alloy with the highest thermal stability (Nb = 3%), the α-Fe(Co) nanograin grows, without the co-participation of the hard magnetic Fe3B, in a relatively wide range of annealing temperatures up to 460 °C, where the second local minimum in coercivity and core power losses exists. For the remaining annealed alloys, due to lower thermal stability than the Nb = 3% alloy, the Fe3B phase starts to crystallise at lower annealing temperatures, making an essential contribution to magneto-crystalline anisotropy, thus the substantial increase in coercivity and induction saturation. The air-annealing process tested on the studied alloys for optimal annealing conditions has potential use for this type of material. Additionally, optimally annealed Mo-containing alloys are less lossy materials than Nb-containing alloys in a frequency range up to 400 kHz and magnetic induction up to 0.8 T.

Influence of microstructure on thermal relaxation in nanocrystalline soft magnetic materials

Effects of Ambient Gasses on the Magnetic Properties of Fe84.8Zr3.4Nb3.4B7.4Cu1 Nanocrystalline Alloy

Crystallization Kinetics and Magnetic Properties of Fe73.5si13.5b9cu1nb1v2 Nanocrystalline Powder Cores

Investigating the structural properties of a novel soft magnetic Fe-based amorphous alloy by dynamic mechanical relaxation

Crystallization Kinetics of Co-Finemet Amorphous Alloys and Magnetic Properties of Nanocrystalline Powder Cores

Magnetic Properties of Amorphous Nanocrystalline Alloys Based on Iron with Different Contents of Nobium in Structural Relaxation Processes

Exploring Microstructure and Magnetic Domain Evolution in the As-cast Soft Magnetic Fe74B20Nb2Hf2Si2 Alloy: A Comprehensive Study Using STEM, Lorentz TEM, and LM-STEM DPC Microscopy

On the theoretical understanding of nanocrystalline soft magnetic materials

Interplay of Crystallization, Stress Relaxation and Magnetic Properties for Fecunbsib Soft Magnetic Composites

Influence of microstructure and anisotropy on the high-frequency soft magnetic properties of nanocrystalline FeSiBNbCuP alloys

Magnetic and structural behaviours of nanocrystalline Fe 70.8 Nb 3.7 Cu 1 Al 2.7 Mn 0.7 Si 13.5 B 7.6 alloy

Characterization and Analysis of Nanocrystalline Soft Magnetic Alloys: Fe Based

Study of magnetization processes in amorphous ferromagnetic alloys after heat treatment below the crystallization temperature

Thermomagnetic Analysis of the Crystallization in Soft Magnetic Nanocrystalline Alloys

Investigation of (Fe,Co)NbB-Based Nanocrystalline Soft Magnetic Alloys by Lorentz Microscopy and Off-Axis Electron Holography

Effective anisotropy and saturation magnetostriction of soft magnetic FeZrB(Cu) amorphous and nanocrystalline alloys

Influence of Nb and Mo Substitution on the Structure and Magnetic Properties of a Rapidly Quenched Fe79.4Co5Cu0.6B15 Alloy

Microstructural Changes Influencing the Magnetoresistive Behavior of Bulk Nanocrystalline Materials

Effect of heat treatment on dynamic magnetic properties and microstructures of Fe73.5Cu1Nb3Si13.5B9 nanocrystalline alloy

The Effect of Quenching Rate on Structure and Soft Magnetic Properties of High Bs Fe-Based Nanocrystalline Alloys

Influence of Annealing Temperature on Microstructure and Magnetic Properties of FeSiNbCuBP Amorphous Alloys