Abstract:III-V semiconductor light-emitting diodes (LEDs) are a promising candidate for demonstrating electroluminescent cooling. However, exceptionally high internal quantum efficiency designs are paramount to achieving this goal. A significant loss mechanism preventing unity internal quantum efficiency in GaAs-based devices is nonradiative surface recombination at the perimeter sidewall. To address this issue, an unconventional LED design is presented, in which the distance from the central current injection area to the device's perimeter is extended while maintaining a constant front contact grid size. This approach effectively moves the perimeter beyond the lateral spread of current at an operating current density of 101-102 A/cm2. In p-i-n GaAs/InGaP double heterojunction LEDs fabricated with varying sizes and perimeter extensions, a 19% relative increase in external quantum efficiency is achieved by extending the perimeter-to-contact distance from 25 to 250 μm for a front contact grid size of 450 × 450 μm2. Utilizing an in-house developed Photon Dynamics model, the corresponding relative increase in internal quantum efficiency is estimated to be 5%. These results are ascribed to a significant reduction in perimeter recombination due to a lower perimeter-to-surface area (P/A) ratio. However, in contrast to lowering the P/A ratio by increasing the front contact grid size of LEDs, the present method enables these improvements without affecting the required maximum current density in the microscopic active LED area under the front contact grid. These findings aid in the advancement of electroluminescent cooling in LEDs and could prove useful in other dedicated semiconductor devices where perimeter recombination is limiting.

30% external quantum efficiency from surface textured, thin‐film light‐emitting diodes

High-Efficiency, Microscale Gan Light-Emitting Diodes and Their Thermal Properties on Unusual Substrates

High-output power GaN-LED based on surface plasmon enhancement

Reduced Surface Recombination in Extended-Perimeter LEDs toward Electroluminescent Cooling

Enhanced Light Extraction from a GaN-based Green Light-Emitting Diode with Hemicylindrical Linear Grating Structure.

Light‐Emitting Diodes: High‐Efficiency, Microscale GaN Light‐Emitting Diodes and Their Thermal Properties on Unusual Substrates (small 11/2012)

Improvement of light extraction efficiency in AlGaInP-based vertical miniaturized-light-emitting diodes via surface texturing

New Progress in wafer epitaxy technologies for high-brightness white LEDs

Improving the External Quantum Efficiency of High-Power GaN-Based Flip-Chip LEDs by Using Sidewall Composite Reflective Micro Structure

Improving the Light Extraction Efficiency of GaN-Based Thin-Film Flip-Chip Micro-LEDs through Inclined Sidewall and Photonic Crystals

External Quantum Efficiency Enhancement of InGaN-Based Quantum Dot Green Micro-Light-Emitting Diode Arrays by Fabricating Full-A-Sided Triangular Mesa

Role of surface microstructure and shape on light extraction efficiency enhancement of GaN micro-LEDs: A numerical simulation study

Defect-Reduced Green Gainn/Gan Light-Emitting Diode On Nanopatterned Sapphire

High-Efficiency Vertical-Chip Micro-Light-Emitting Diodes via p-GaN Optimization and Surface Passivation

Efficiency degradation induced by surface defects-assisted tunneling recombination in GaN/InGaN micro-light-emitting diodes

Study of GaN-Based Light-Emitting Diode (LED) With a Hybrid Surface Structure

Light Extraction Improvement from GaN-Based Light-Emitting Diodes with Nano-Patterned Surface Using Anodic Aluminum Oxide Template

Optimized GaAs∕AlGaAs Light-Emitting Diodes and High Efficiency Wafer-Fused Optical Up-Conversion Devices

Engineering Perovskite Nanocrystal Surface Termination for Light‐Emitting Diodes with External Quantum Efficiency Exceeding 15%

Simulation of Nanoscale ITO Top Grating of GaN LED

Enhanced Light Extraction Efficiency by Self-Masking Technology with Carbonized Photoresist for Light-Emitting Diodes