Abstract:This paper presents the electrochemical changes of concrete specimen containing pre-corroded steel rebar with different periods of electrochemical chloride extraction (ECE) treatments. Concrete specimens were prepared with three w/b ratios (0.45, 0.38 and 0.32) and three levels of cement replacement by fly ash at 0%, 10%, 20%. And 3% chloride (NaCl) by mass of binder was added to the mixing water as a source of chloride ions for every mix. The measured electrochemical properties include half-cell potential E-corr, corrosion rate I-corr and concrete resistivity. The results show that a higher water to cement ratio or more addition of fly ash results in a severer corrosion happening on the reinforcing steel rebar prior to the ECE treatment. Although the resistivity of cover concrete is remarkably improved, the corrosion state is aggravated after ECE treatment according to the Ecorr and Icorr evolution. This worse corrosion state of steel is partly attributed to the temporary alkaline corrosion, confirmed by the highly localized accumulation of alkali (K+ and Na+) in the steel-concrete interface and some black-brown corrosion products formed on the steel surface. Therefore, electrochemical chloride extraction (ECE) is capable of removing the chloride ions but is not sufficient to guarantee the repassivation if the corrosion process of steel has already occurred.

Corrosion Behavior of AISI 304 Stainless Steel Reinforcements in SCBA-SF Ternary Ecological Concrete Exposed to MgSO4

Corrosion Behavior of AISI 1018 Reinforcing Steel in Sustainable Concrete made with Sugar Cane Bagasse Ash and Recycled Aggregates Exposed in Seawater

Corrosion Inhibition and Adsorption Behavior of (3-Aminopropyl)-triethoxysilane on Steel Surface in the Simulated Concrete Pore Solution Contaminated with Chloride

The Effect of Electro-Migrating 3-Aminopropyltriethoxysilane on the Improvement of the Reinforced Concrete Durability

Bidirectional Electromigration of A Corrosion Inhibitor in Chloride Contaminated Concrete

Electrochemical Corrosion Behavior of Carbon Steel Reinforcement in Concrete Containing Limestone and Mesoporous Silica Nanoparticles under Acidic Environment

Effect of modified supplementary cementitious material on performance of mortar and concrete in marine environment

Application of Electrochemical Impedance Spectroscopy to Evaluate the Corrosion Behavior of 2304 Duplex Stainless Steel Reinforced Rebar in Concrete Exposed in Chloride-Rich Environment

Chloride-induced Corrosion Patterns of Reinforcements in Simulated Pore Solutions of Calcium Sulfoaluminate Cement Concrete: an Analytical Study

A study of steel bar reinforcement corrosion in concretes with SF and SRH using electrochemical impedance spectroscopy

Effect of a Hybrid Pumice–Portland Cement Extract on Corrosion Activity of Stainless Steel SS304 and Carbon Mild Steel A36

Electrochemical Investigations of Steels in Seawater Sea Sand Concrete Environments

EIS Investigation of the Corrosion Behavior of Steel Bars Embedded into Modified Concretes with Eggshell Contents

Effect of Sugarcane Bagasse Ash and Ceramic Waste Dust as Partial Replacements of Portland Cement on Corrosion Behavior of HRB400 Low Carbon Steel Reinforcement in 3.5 % NaCl

Electrochemical Changes of Pre-Corroded Steel Reinforced Concrete Due to Electrochemical Chloride Extraction

Characterization of Supplementary Cementitious Materials and Fibers to Be Implemented in High Temperature Concretes for Thermal Energy Storage (TES) Application

Calcined Clay and Limestone as Partial Replacements of Portland Cement: Electrochemical Corrosion Behavior of Low Carbon Steel Rebar as Concrete Reinforcement in Corrosive Environment

Corrosion resistance of chromium‐steel and stainless steel reinforcement in concrete

Internal corrosion characteristics of endogenous sulfate introduced by recycled aggregates in recycled aggregates concrete: Insights into the macro-mechanical and meso-mechanical properties

Effect of Bagasse Ash Admixture on Corrosion Behavior of Low Carbon Steel Reinforced Concrete in Marine Environment

Electrochemical analysis of the effect of copper tailings on mortars