Abstract:Shape memory alloys (SMAs) gained increasing attentions from the perspective of seismic protection, primarily because of their excellent superelasticity, satisfactory damping and high fatigue life. However, the superelastic strain of SMAs has an upper limit, beyond which the material completes the austenite to martensite phase transformation and is followed by noticeable strain hardening. The strain hardening behavior would not only induce high force demand to the protected structures, but also cause unrecoverable deformation. More importantly, the SMAs may fracture if the deformation demand exceeds their capacity under severe earthquakes. In the case of installing SMA braces (SMABs) in the multi-story concentrically braced frames (CBFs), the material failure would lead to the malfunction of SMABs and this further causes building collapse. The friction mechanism could behave as a “fuse” through capping the strength demand at a constant level. Therefore, this paper suggests connecting the SMAB with a friction damper to achieve a novel brace, i.e. the SMA-friction damping brace (SMAFDB). A proof-of-concept test was carried out on a homemade specimen and the test results validated the novel brace behaves in a desirable manner. In addition, to explore the seismic response characteristics of the SMAFDB within structures, a six-story CBF equipped with SMAFDBs was designed and compared against those incorporated with SMABs or friction damping braces (FDBs) at the frequently occurred earthquake (FOE), design basis earthquake (DBE) and maximum considered earthquake (MCE). The comparative results show the SMAFDB is superior to the counterparts. Under the FOE and DBE ground motions, the SMAFDBs successfully eliminated residual deformations as the SMABs do, and achieved identical maximum interstory drift as the FDBs. Under the MCE ground motions, the SMAFDBs not only well addressed the brace failure problem that was possibly encountered in the SMABs, but also better controlled residual deformation than the FDBs.

Seismic Response Control of Offshore Platforms Equipped with Optimum Localization of SMA

Vibration control of offshore jacket platforms through shape memory alloy pounding tuned mass damper (SMA-PTMD)

Effects of Shape Memory Alloys on Response of Steel Structural Buildings within Near Field Earthquakes Zone

Seismic behaviour of self-centring hybrid steel frames equipped with SMA plates under mainshock–aftershock sequences

Performance‐based optimum seismic design of self‐centering steel moment frames with SMA‐based connections

Seismic assessment of concrete buildings reinforced with shape memory alloy materials in different stories

A new constitutive model of shape memory alloy and its seismic mitigation capacity compared with existing models

Semi-active Seismic Vibration Control Offshore Jacket Platforms

Shaking Table Tests and Analysis of Offshore Jacket Platform Structures Model with SMA Damping Isolation Systems

Seismic Design Method for Multi-Story SMA Braced Frames Based on Inelastic Displacement Ratio

Sensitivity Analysis and Multi-Criteria Optimization of SMA Cable Restrainers for Longitudinal Seismic Protection of Isolated Simply Supported Highway Bridges

Seismic Behavior of Superelastic Shape Memory Alloy Spring in Base Isolation System of Multi-Story Steel Frame

Experimental-analytical investigation of accelerated bridge construction concrete columns with self-centering Fe-SMA bars subjected to near-fault ground motions

Control on Nonlinear Seismic Response of Cable-Stayed Bridge Using SMA Damper Based on OpenSees

Feasibility of using superelastic shape memory alloy in plastic hinge regions of steel bridge columns for seismic applications

Application of shape memory alloy bars in self-centring precast segmental columns as seismic resistance

Seismic Performance Evaluation of Multi-Story CBFs Equipped with SMA-friction Damping Braces

Seismic assessment of RC structures having shape memory alloys rebar and strengthened using CFRP sheets in terms of fragility curves

Seismic performance of deficient RC frames retrofitted with SMA-reinforced ECC column jacketing

Seismic Performance of an Earthquake Resilient Self-Centering Precast Reinforced Concrete Rocking Wall with External SMA Rods

Probabilistic seismic risk assessment of concrete bridge piers reinforced with different types of shape memory alloys