Abstract:Purpose Fused filament fabrication (FFF) is a popular technique in rapid prototyping capable of building complex structures with high porosity such as cellular solids. The study of cellular solids is relevant by virtue of their enormous potential to exhibit non-traditional deformation mechanisms. The purpose of this study is to exploit the benefits of the FFF technology to fabricate re-entrant honeycomb structures using thermoplastic polyurethane (TPU) to characterize their mechanical response when subjected to cyclic compressive loadings. Design/methodology/approach Specimens with different volume fraction were designed, three-dimensionally printed and tested in uniaxial cyclic compressions up until densification strain. The deformation mechanism and apparent elastic moduli variation throughout five loading/unloading cycles in two different loading orientations were studied experimentally. Findings Experimental results demonstrated a nonlinear relationship between volume fraction and apparent elastic modulus. The amount of energy absorbed per loading cycle was computed, exhibiting reductions in energy absorbed of 12%–19% in original orientation and 15%–24% when the unit cells were rotated 90°. A softening phenomenon in the specimens was identified after the first compression when compared to second compression, with reduction in apparent elastic modulus of 23.87% and 28.70% for selected samples V 3 and H 3 , respectively. Global buckling in half of the samples was observed, so further work must include redesign in the size of the samples. Originality The results of this study served to understand the mechanical response of TPU re-entrant honeycombs and their energy absorption ability when compressed in two orientations. This study helps to determine the feasibility of using FFF as manufacturing method and TPU to construct resilient structures that can be integrated into engineering applications as crash energy absorbers. Based on the results, authors suggest structure's design optimization to reduce weight, higher number of loading cycles (n > 100) and crushing velocities (v > 1 m/s) in compression testing to study the dynamic mechanical response of the re-entrant honeycomb structures and their ability to withstand multiple compressions.

Design and mechanical properties of 3D-printed auxetic honeycomb structure

The Effect of Design and Fabrication Parameters on the Mechanical Properties of 3D Re-Entrant Honeycomb Auxetic Structures

Investigation of the energy absorption capacity of foam-filled 3D-printed glass fiber reinforced thermoplastic auxetic honeycomb structures

Mechanical Behavior of 3D-Printed Thickness Gradient Honeycomb Structures

Multifunctional auxetic and honeycomb composites made of 3D woven carbon fibre preforms

3D printed recoverable honeycomb composites reinforced by continuous carbon fibers

Experimental characterization of the mechanical properties of 3D printed TPU auxetic cellular materials under cyclic compressive loadings

Mechanical and energy absorption properties of 3D-printed honeycomb structures with Voronoi tessellations

A new hybrid auxetic structure capable of uniform deformation exhibits excellent energy absorption

In-Plane Compressive Responses of Non-Homogenous Re-Entrant Honeycombs Fabricated by Fused Deposition Modelling Manufactured

Parameter-Independent Deformation Behaviour of Diagonally Reinforced Doubly Re-Entrant Honeycomb

Compressive properties and failure mechanisms of 3D-printed continuous carbon fiber-reinforced auxetic structures

Analysis of Mechanical Properties and Parameter Dependency of Novel, Doubly Re-Entrant Auxetic Honeycomb Structures

An experimental and numerical study on an innovative metastructure for 3D printed thermoplastic polyurethane with auxetic performance

The compressive responses and failure behaviors of composite graded auxetic re-entrant honeycomb structure

Advanced Design and Fabrication of Dual-Material Honeycombs for Improved Stiffness and Resilience

Compressive and flexural responses of auxetic sandwich panels with modified re-entrant honeycomb cores

Acoustic-assisted DLP 3D Printing Process for Carbon Nanofiber Reinforced Honeycomb Structures

Compression performance of 3D-printed thermoplastic auxetic structures

Energy absorption and piezoresistive characteristics of 3D printed honeycomb composites with hybrid cell architecture

Evaluation of the mechanical properties of fully integrated 3D printed polymeric sandwich structures with auxetic cores: experimental and numerical assessment