Abstract:Fused deposition modeling (FDM) printed polymers are rarely used as a structural material due to anisotropic and low mechanical properties compared with conventional composites. In recent years, greater need has been expressed for recycling of materials, such as recyclable FDM, at the end of service life to reduce environmental pollution and manufacture cost. However, how the amount of resin uptake in the skin and skin/core interphase affects the bending and shear performance of the sandwich composites when replacing the low strength and ductile core (conventional core) with a high strength and brittle core (FDM printed PLA (polylactic acid) core) still remains unclear. A new manufacturing routine is needed to improve the incorporation of FDM printed polymers in composite structures. In this work, FDM printed PLA was used as core material and sandwiched between two unidirectional glass fiber reinforced polymer (GFRP) skins to form a sandwich composite by compression-molding (CM) process, which provides a good manufacturing strategy for skin/core interphase modification. The significance of the CM process is proved by investigating the effect of resin uptake on bending and in-plane/out-of-plane shear performances. Current first order shear deformation (FSDT) theory lacks a direct connection between the in-plane shear stress and out-of-shear stress in the core region of sandwich composites. With the help of DIC, a connection between the in-plane shear and the out-of-plane shear strain was built and in-plane shear properties can acquire through out-of-plane shear properties, hence reducing the redundancy of sample preparation or the need for simulation. A significant improvement was found compared with the optimized resin uptake (Optimized resin uptake range: 20.43%–22.86 wt%) 3D-printed PLA core sandwich composite and lowest performance sandwich composite (Improvement: in-plane shear strength (∼34%)/modulus (∼29%), out-of-plane shear strength (∼25%)/modulus (∼31%), specific peak bending load (∼19%)). Compared with balsa core sandwich composites, the 3D-printed cores are suitable for use in composite sandwich structures in many applications with a satisfactory strength-to-weight ratio.

Evaluation of the mechanical properties of fully integrated 3D printed polymeric sandwich structures with auxetic cores: experimental and numerical assessment

Compressive and flexural responses of auxetic sandwich panels with modified re-entrant honeycomb cores

3D printed sandwich beams with bioinspired cores: Mechanical performance and modelling

Mechanical performances of metal-polymer sandwich structures with 3D-printed lattice cores subjected to bending load

Mechanical characterization of a 3D printed lattice core sandwich structure

Mechanical Property Characterization of 3D-Printed Carbon Fiber Honeycomb Core Composite Sandwich Structures

Comparative study on bending behavior and damage analysis of 3D-printed sandwich core designs with bio-inspired reinforcements

The flexural and compressive properties of sandwich composites with different 3D-printed core structures

Investigation of the energy absorption capacity of foam-filled 3D-printed glass fiber reinforced thermoplastic auxetic honeycomb structures

Mechanical Characteristics of Sandwich Structures with 3D-Printed Bio-Inspired Gyroid Structure Core and Carbon Fiber-Reinforced Polymer Laminate Face-Sheet

Study on the bending and shear properties of quasi-honeycomb sandwich structures considering the variable-density core design

An optimization analysis of a sandwich composite panel with auxetic reentrant core using lichtenberg algorithm based on surrogate modelling

Effect of varying core density and material on the quasi‐static behaviors of sandwich structure with 3D‐printed hexagonal honeycomb core

Enhancing energy absorption of the sandwich beams with a synergetic strategy of flexible/rigid materials in re-entrant auxetic cores under flexural loading

Initial performance assessment of 3D printed thin walled structures for spacecraft applications

Mechanical Performance of 3D-Printing Plastic Honeycomb Sandwich Structure

Mechanical Properties of Sandwiched Construction with Composite and Hybrid Core Structure

Multi-scale Modeling and Numerical Analysis of Sandwich Beams with FG Auxetic 3D Lattice Cores and GRC Face Sheets Subjected to Drop-Weight Impacts

Preliminary investigation of the large-scale sandwich decks with graded 3D printed auxetic core

Bending and shear improvements in 3D-printed core sandwich composites through modification of resin uptake in the skin/core interphase region

Experimental, numerical and optimization investigation of sandwich structures with 3D-printed sacrificial core under explosive loading