Abstract:The separation of CO2 from N2 remains a highly challenging task in postcombustion CO2 capture processes, primarily due to the relatively low CO2 content (3-15%) compared to that of N2 (70%). This challenge is particularly prominent for carbon-based adsorbents that exhibit relatively low selectivity. In this study, we present a successfully implemented strategy to enhance the selectivity of composite aerogels made of reduced graphene oxide (rGO) and functionalized polymer particles. Considering that the CO2/N2 selectivity of the aerogels is affected on the one hand by the surface chemistry (offering more sites for CO2 capture) and fine-tuned microporosity (offering molecular sieve effect), both of these parameters were affected in situ during the synthesis process. The resulting aerogels exhibit improved CO2 adsorption capacity and a significant reduction in N2 adsorption at a temperature of 25 °C and 1 atm, leading to a more than 10-fold increase in selectivity compared to the reference material. This achievement represents the highest selectivity reported thus far for carbon-based adsorbents. Detailed characterization of the aerogel surfaces has revealed an increase in the quantity of surface oxygen functional groups, as well as an augmentation in the fractions of micropores (<2 nm) and small mesopores (<5 nm) as a result of the modified synthesis methodology. Additionally, it was found that the surface morphology of the aerogels has undergone important changes. The reference materials feature a surface rich in curved wrinkles with an approximate diameter of 100 nm, resulting in a selectivity range of 50-100. In contrast, the novel aerogels exhibit a higher degree of oxidation, rendering them stiffer and less elastic, resembling crumpled paper morphology. This transformation, along with the improved functionalization and augmented microporosity in the altered aerogels, has rendered the aerogels almost completely N2-phobic, with selectivity values ranging from 470 to 621. This finding provides experimental evidence for the theoretically predicted relationship between the elasticity of graphene-based adsorbents and their CO2/N2 selectivity performance. It introduces a new perspective on the issue of N2-phobicity. The outstanding performance achieved, including a CO2 adsorption capacity of nearly 2 mmol/g and the highest selectivity of 620, positions these composites as highly promising materials in the field of carbon capture and sequestration (CCS) postcombustion technology.

Preparation and characterization of RGO-incorporated hypercross-linked polymers for CO2 capture

Design and development of 3D hierarchical ultra-microporous CO2-sieving carbon architectures for potential flow-through CO2 capture at typical practical flue gas temperatures

Experimental kinetics and thermodynamics investigation: Chemically activated carbon-enriched monolithic reduced graphene oxide for efficient CO2 capture

Enhancing CO2 capture through innovating monolithic graphene oxide frameworks

Green synthesis of hypercrosslinked polymers for CO2 capture and conversion: Recent advances, opportunities, and challenges

A Novel Strategy to Enhance the Performance of CO2 Adsorption Separation: Grafting Hyper-cross-linked Polyimide onto Composites of UiO-66-NH2 and GO

Nitrogen-Doped Porous Carbon Materials Derived from Graphene Oxide/Melamine Resin Composites for CO2 Adsorption

Facile Synthesis of MOF-5-derived Porous Carbon with Adjustable Pore Size for CO2 Capture

Improving CO2 adsorption efficiency of an amine-modified MOF-808 through the synthesis of its graphene oxide composites

Engineering Porous Organic Polymers for Carbon Dioxide Capture

Efficient CO2 adsorption using chitosan, graphene oxide, and zinc oxide composite

N‐doped Porous Carbon Derived from the Pyrolysis of a Polydopamine‐coated Hypercross‐linked Polymer for Enhanced CO2 Adsorption

Graphene oxide grafted hyperbranched poly (vinyl imidazole) with ionic liquid components as a potential carbon dioxide scrubber

Resembling Graphene/Polymer Aerogel Morphology for Advancing the CO2/N2 Selectivity of the Postcombustion CO2 Capture Process

Rice husk char as a sustainable material for the preparation of graphene oxide-supported biocarbons with mesoporous structure: A characterization and adsorption study

Facile synthesis of amine-functionalized three-dimensional graphene composites for CO2 capture

Preparation of N-Enriched GO Adsorbents and Their Properties for Selective CO2 Capture

High Selectivity Fuel from Efficient CO2 Conversion by Zn-Modified rGO and Amine-Functionalized CuO as a Photocatalyst

Graphene Oxide Functionalized by Poly(ionic Liquid)s for Carbon Dioxide Capture

Design and Synthesis of N-Doped Porous Carbons for the Selective Carbon Dioxide Capture under Humid Flue Gas Conditions

Highly porous carbon derived from hydrothermal-pyrolysis synergistic carbonization of biomass for enhanced CO 2 capture