Abstract:Typical organic pollutants from coal-combustion flue gas such as volatile organic compounds (VOCs) need to be effectively controlled. This work synthesized a series of nitrogen-doped hierarchical porous carbons (NHPCs) by one-step activation with various proportions of cellulose, (NH4)(2)C2O4 and KHCO3/NaHCO3. The NHPCs have a high specific surface area and pore volume up to 2816 m(2)/g and 1.413 cm(3)/g as well as a hierarchical porous structure with micro-meso-macropores distribution. The dynamic adsorption tests of toluene at 600 ppm showed that NHPCs have a high adsorption capacity up to 585 mg/g (NHPC(K)131), this was about 3 times more than that of AC (208 mg/g), and is a better absorbent compared to many other carbon adsorbents. The porous characteristics and toluene adsorption properties of NHPCs improved along with the fluctuation of the proportions of raw materials and active agents. The micropore size of the material is the main factor that affecting the toluene adsorption capacity. The analysis of toluene dynamic adsorption breakthrough curves revealed that NHPCs had great toluene adsorption kinetics with high adsorption rate constants and short mass transfer zone. The excellent toluene adsorption kinetics of NHPCs can be attributed to the hierarchical porous structure. The abundant 2-10 nm mesopores and macropores of NHPCs act as mass transfer channels for toluene molecules. The XPS analysis showed that the NHPCs have nitrogen doping up to 6.71% (NHPC(Na)161) and they effectively promote toluene adsorption. The nitrogen doping mechanism can be attributed to the reactions between cellulose pyrolysis substances and NH3 which decomposed from (NH4)(2)C2O4. Moreover, the pore forming reactivity of KHCO3 is better than that of NaHCO3 in the NHPCs activation process. (C) 2021 Elsevier Ltd. All rights reserved.

N‐doped Porous Carbon Derived from the Pyrolysis of a Polydopamine‐coated Hypercross‐linked Polymer for Enhanced CO2 Adsorption

Nitrogen-Doped Ultrahigh Microporous Carbons Derived from Two Nitrogen-Containing Post-Cross-Linked Polymers for Efficient CO2 Capture

Construction of Ultramicropore-Enriched N-doped Carbons for CO2 Capture: Self-decomposition of Polyethyleneimine-Based Precursor to Promote Pore Formation and Surface Polarity

CO2 capture by nitrogen-doped porous carbons derived from nitrogen-containing hyper-cross-linked polymers

Nitrogen-Doped Porous Carbons Derived from Triarylisocyanurate-Cored Polymers with High CO2 Adsorption Properties

N-doping Porous Carbon with Rich Narrow Micropores for Highly Efficient CO2 Selective Adsorption: Insight from Experimental and Theoretical Study

Synthesis of N-doped Hierarchical Porous Carbon with Excellent Toluene Adsorption Properties and Its Activation Mechanism

Nitrogen-doped Porous Carbon for Excellent CO2 Capture: A Novel Method for Preparation and Performance Evaluation

Nitrogen-Doped Microporous Carbon Prepared by One-Step Carbonization: Rational Design of a Polymer Precursor for Efficient CO2 Capture

N-doped hierarchically porous carbons prepared with the assistance of chemical blowing and in-situ hard template as highly efficient CO 2 adsorbents: A combined experimental and theoretical study

Nitrogen-doped Porous Carbon Nanofiber Webs for Efficient CO2 Capture and Conversion

Hierarchical N-Doped Carbon As CO2 Adsorbent with High CO2 Selectivity from Rationally Designed Polypyrrole Precursor.

N-doped Porous Carbon Derived from Rgo-Incorporated Polyphenylenediamine Composites for CO2 Adsorption and Supercapacitors

Oxygen-rich Porous Carbons from Carbonyl Modified Hyper-Cross-linked Polymers for Efficient CO2 Capture

Nitrogen-Doped Microporous Carbon Materials Derived from DBU-Modified Carboxylic Acid Polymers for CO 2 Capture

Pyrrolic N-enriched Carbon Fabricated from Dopamine-Melamine Via Fast Mechanochemical Copolymerization for Highly Selective Separation of CO2 from CO2/N2

Triazine-based Hyper-Cross-linked Polymers with Inorganic-Organic Hybrid Framework Derived Porous Carbons for CO2 Capture

Benzimidazole Precursor-Derived N-Doping Porous Carbon with High-Efficiency Co2 Selective Adsorption: Insight from Experimental and Theoretical Study

Synthesis and characterization of polyphenylene sulfide resin-derived S-doped porous carbons for efficient CO 2 capture

Synthesis and evaluation of N, O‐doped hypercrosslinked polymers and their performance in CO2 capture

N-doped Highly Microporous Carbon Derived from the Self-Assembled Lignin/chitosan Composites Beads for Selective CO2 Capture and Efficient P-Nitrophenol Adsorption