Abstract:Antimony sulfide (Sb2S3) and antimony selenide (Sb2Se3) with optical bandgaps (Eg) of 1.88 eV and 1.1 eV, respectively; both crystallize in the orthorhombic structure and can produce Sb2SxSe3‐x of intermediate Eg for solar cells. We used powder sources of Sb2S3 and Sb2Se3 in different mass ratios in vacuum thermal evaporation to produce Sb2SxSe3‐x thin films of thickness, 455 nm. These films showed a systematic variation in their characteristics with x: A, Sb2S2.05Se0.95 (Eg, 1.51 eV); B, Sb2S1.71Se1.29 (1.44 eV); C, Sb2S1.24Se1.76 (1.40 eV); D, Sb2S0.64Se2.36 (1.32 eV); and E, Sb2S0.44Se2.56 (1.29 eV); in the light generated current density; and in their photoconductivity. Solar cells of SnO2:F/CdS(100nm)/Sb2SxSe3‐x(455 nm)/C‐Ag with Sb2SxSe3‐x films of compositions A – E show open circuit voltages (Voc) of 0.566 – 0.418 V; short circuit current densities of 9.65 – 31.5 mA/cm2; fill factors of 0.38 – 0.52 and conversion efficiencies (η) of 2.1 – 6.8 %. Seven series‐connected solar cells of E of 7 cm2in area produces 34.2 mW with Voc of 2.83 V and η, 4.88 %. In view of their operational stability, we discuss the material perspectives of Sb2SxSe3‐x and considerations to improve these solar cells.This article is protected by copyright. All rights reserved.

Open-Circuit Voltage Loss of Antimony Chalcogenide Solar Cells: Status, Origin, and Possible Solutions

Device engineering of Sb 2 X 3 antimony chalcogenide for loss analysis and strategies for maximizing photovoltaic efficiency

Development of Antimony Sulfide–selenide Sb2(S, Se)3-based Solar Cells

Crystal Growth Promotion and Defects Healing Enable Minimum Open-Circuit Voltage Deficit in Antimony Selenide Solar Cells

A Perspective of Antimony Chalcogenide Photovoltaics Toward Commercialization

A Review on Suppressing Nonradiative Recombination Losses in Antimony Chalcogenide Thin‐Film Solar Cell

A Perspective of Antimony Chalcogenide Photovoltaics towards Commercialization

Negative-pressure Sulfurization of Antimony Sulfide Thin Films for Generating a Record Open-Circuit Voltage of 805 Mv in Solar Cell Applications

Systematic Variation of Material Characteristics with Chemical Composition in Antimony Sulfide Selenide Thin Films and Its Relevance to Solar Cell Performance

Se-Elemental Concentration Gradient Regulation for Efficient Sb2(S,Se)3 Solar Cells With High Open-Circuit Voltages

An Optimization Path for Sb2(S,Se)3 Solar Cells to Achieve an Efficiency Exceeding 20

Gradient bandgap modification for highly efficient carrier transport in antimony sulfide-selenide tandem solar cells

Both Free and Trapped Carriers Contribute to Photocurrent of Sb 2 Se 3 Solar Cells.

Sputtered and Selenized Sb2Se3 Thin-Film Solar Cells with Open-Circuit Voltage Exceeding 500 Mv

HTL-Free Sb 2 (S, Se) 3 Solar Cells with an Optimal Detailed Balance Band Gap

Negative-pressure sulfurization of antimony sulfide thin films for generating record open-circuit voltage of 805 mV in solar cell applications

Interface engineering of antimony selenide solar cells: A review on the optimization of energy band alignments

Lowest Open‐Circuit Voltage Deficit Achievement to Attain High Efficient Antimony Selenosulfide Solar Cells

Suppressing Buried Interface Nonradiative Recombination Losses Towards High‐efficiency Antimony Triselenide Solar Cells

Improved Open‐Circuit Voltage of Sb 2 Se 3 Thin‐Film Solar Cells Via Interfacial Sulfur Diffusion‐Induced Gradient Bandgap Engineering

10 Years of Sb 2 Se 3 Thin Film Solar Cells